Power Cable 220V / 230V for PC & laptops

Power cables for computers, laptops and tablet PCs

Buy replacement and spare power cables that match the inlet on your device and the South African mains supply. This short guide explains the common IEC connector types, practical buying tips, and safety checks so buyers in South Africa get the right cord fast.

Common connector types and where they are used

• Kettle lead (IEC C13 style): A three-pin IEC mains connector commonly used on desktop power supplies, monitors and larger external power bricks. It is often called a kettle lead or IEC 320 cable in technical descriptions.
 
• 3-pin clover (IEC C5): A compact three-pin "cloverleaf" inlet used on many small laptop power adapters and some portable projectors. The clover shape makes it quick to identify.
 
• Figure-8 (IEC C7): A two-prong, non-polarized "figure 8" connector used for smaller chargers, some slim laptop adapters and many audio/video devices.

Key technical checks before you buy

• Match the inlet shape: Check the device or power brick inlet and choose the cord with the matching IEC connector style (C13, C5, C7, etc).
 
• Voltage and frequency compatibility: South Africa uses approximately 230V at 50Hz. Ensure the device or its external power supply is rated for the local mains. If the device expects a different voltage, do not rely only on a cord - use a proper transformer or verified dual-voltage adapter.
 
• Current and temperature ratings: Use cords rated for the current your device draws. Some IEC variants are temperature-rated differently for hotter appliances; pick the correct variant for high-heat scenarios.
 
• Cable length and gauge: Choose a length that avoids tension but is not excessively long. Thicker gauge cables handle higher current and reduce voltage drop on higher-draw equipment.
 
• Certification and safety marks: Prefer cords and plugs with recognised safety certification for your region and avoid visibly poor moulding or brittle insulation.

Practical buying tips for South African shoppers

• Identify the inlet visually: The simplest way to buy the correct spare is to match the inlet shape on the device or power brick to the cord end.
 
• Carry a spare for travel and backups: A spare figure-8 or clover cord covers many portable devices, while a kettle-style cord suits desktop gear and monitors.
 
• Avoid mismatches: Do not force-fit connectors. If the cord fits but the device overheats or the connector is loose, stop using it and source the correct type.
 
• Check return and warranty policies: Make sure the retailer accepts returns for incorrect types and that cords come with at least basic warranty or safety assurance.

Quick safety reminders

• Do not use damaged or frayed cords.
 
• Do not modify mains connectors or attempt DIY repairs on the cord’s plug.
 
• Replace cords with certified, intact replacements rather than using adapters that compromise earthing or insulation.

Short checklist before checkout

• Connector type matches device inlet
 
• Cable current and temperature rating meet device needs
 
• Length and gauge appropriate for intended use
 
• Safety certification or quality assurance present

Choosing the correct IEC-style power cable is a small purchase that prevents damage, increases safety and keeps devices working reliably on South African mains. Use the inlet shape and device ratings as your guide when selecting a kettle lead, cloverleaf or figure-8 cord.

South African Plug standards

3-pin South African plug (Old Type - Type M)

    Maximum rating: 250V 15A
    SANS standards: SANS 164-1
    Also referred to as: Type M, Large South African plug
    Layout: Triangular pin layout, approx. 5.0 cm x 5.0 cm

3-pin South African plug (New Type - Type N)

    Maximum rating: 250V 16A
    SANS standards: SANS 164-2
    Also referred to as: Type N, Compact South African plug
    Layout: Triangular pin layout, approx. 3.5 cm x 3.5 cm

2-pin Europlug

    Maximum rating: 250V 2.5A
    SANS standards: SANS 164-5
    Also referred to as: Type C, Europlug
    Layout: Parallel round pins, approx. 3.5 cm x 1.8 cm

Figure 8 Power Connector

    Maximum rating: 250V 2.5A
    SANS standards: IEC 60320 C7
    Also referred to as: Figure 8, C7 connector
    Layout: Dual rounded slot layout, approx. 2.5 cm x 1.0 cm

Cloverleaf Power Connector

    Maximum rating: 250V 2.5A
    SANS standards: IEC 60320 C5
    Also referred to as: Clover, Mickey Mouse connector, C5 connector
    Layout: Triangular 3-slot layout, approx. 2.8 cm x 2.8 cm

Kettle Plug Connector

    Maximum rating: 250V 10A
    SANS standards: IEC 60320 C13 / C14
    Also referred to as: IEC power cable, PC power connector
    Layout: Rectangular 3-slot layout, approx. 3.0 cm x 2.0 cm

2-pin Shaver Plug

    Maximum rating: 250V 1A
    SANS standards: SANS 164-5
    Also referred to as: Shaver connector, Small 2-pin plug
    Layout: Small parallel pin layout, approx. 2.0 cm x 1.5 cm

IEC C19 High Current Connector

    Maximum rating: 250V 16A
    SANS standards: IEC 60320 C19 / C20
    Also referred to as: Server power connector, High-current IEC
    Layout: Rectangular 3-slot layout, approx. 3.5 cm x 2.5 cm