Overview:

The Accelero L2 PLUS is a cross compatible VGA cooler designed for low end to mid-range graphic cards, same as his predecessor L2 Pro but with a wider compatibility and enhanced RAM and VR cooling. A comprehensive RAM/VR cooling set is also included to improve the cooling performance of RAM/VR.

Features:

Cooling Performance
Featuring a 92 mm PWM fan and a cooling capacity of 120 Watts, the Accelero L2 PLUS ensures components are performing under ideal temperature. The pre-applied MX-4 thermal compound allows enhanced thermal conductivity from the GPU, thus considerably extending its service life.

Multi-Compatible
To accommodate a broad range of models, the Accelero L2 PLUS comes with a versatile mounting mechanism and an extensive RAM and VR cooling set consisting of 16 pieces of RAM/VR heatsinks in various sizes. Featuring the CrossFire and SLI compatibility the users benefit from the optimized performance of a multi-VGA setup.

Virtually Silent
Operated by a low noise impeller enclosed in a patented fan holder to reduce the buzzing sound when the fan is spinning, the Accelero L2 PLUS is barely audible even running at full load. To enable minimum noise level at all circumstances, the PWM controller enables the fan to run at the optimal speed according to the load generated by the GPU.

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	872767004467
Max. Cooling Capacity	120 Watts
Heatsink Material	Aluminum
Fan (mm)	92 mm, 900 - 2, 000 RPM (controlled by PWM)
Bearing	Fluid Dynamic Bearing
Noise Level	0.4 Sone
Current / Voltage	0.16A/ 12V
Product Dimensions (L x W x H)	119 (L) x 94 (W) x 51 (H) mm
Net Weight	250 g
Accessories
Heatsink	16 pcs
Screw (M2)	4 pcs
Washer	4 pcs
Spacer (4 mm)	4 pcs
Insulation Tape	1 pc
Thermal Adhesives (3 g)	1 tube
Mixing Wand	1 pc
4-Pin Fan Power Adapter	1 pc
Packaging Dimensions (L x W x H)	123 (L) x 98 (W) x 55 (H) mm
itemnumber	DCACO-V300101-BL
UPC	872767004467
Gross Weight	0.55 kg