Overview

Ubiquiti UISP Wave Pico - 60 GHz PtMP Station
The Ubiquiti UISP Wave Pico is a lightweight and compact 60 GHz PtMP (Point-to-Multipoint) station designed for high-speed wireless connectivity. Built with Wave Technology, it delivers reliable performance over short to medium distances, making it ideal for urban deployments and dense network environments.

Description

This device offers up to 2 Gbps total throughput with a 1 Gbps duplex capacity, ensuring fast and stable connections. It supports both PtMP and PtP operating modes and includes a 5 GHz weatherproof backup radio for uninterrupted service. With a single Gigabit Ethernet port, integrated Bluetooth, and a versatile voltage range of 44-54V DC, the Wave Pico is easy to install and maintain while providing robust performance in challenging network conditions.

Features

High-Speed Wireless Connectivity

• Operates at 60 GHz for ultra-fast PtMP connections
• Supports both Point-to-Multipoint and Point-to-Point modes
• Maximum throughput of 2 Gbps (1 Gbps duplex) for reliable data transfer

Extended Link Range Options

• Standard Wave AP: up to 1.3 km
• Wave AP Micro: up to 0.9 km
• Includes a 5 GHz backup radio with up to 800 Mbps throughput for continuous connectivity

Compact Design with Easy Deployment

• Lightweight and easy to mount in urban or remote locations
• Single GbE RJ45 port simplifies network integration
• Integrated Bluetooth for easy configuration and monitoring

Power and Antenna Performance

• 48V DC 0.5A Gigabit PoE adapter included
• Supports a wide voltage range from 44V to 54V DC
• 27.7 dBi antenna gain with vertically linear polarization for efficient signal transmission

The Wave Pico combines high-speed performance, compact design, and reliable backup connectivity, making it a versatile solution for modern wireless networks.

Specifications

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	UB-WAVE-PICO
Mechanical
Dimensions	Ø152.1 x 55.8 mm (Ø6 x 2.2")
Weight	Without mount: 347 g (12.2 oz)
	With mount: 409 g (14.4 oz)
Enclosure material	UV stabilized polycarbonate
Mount material	UV stabilized polycarbonate
Pole mount diameter	20 to 53.1 mm (0.8 to 2.1") on pipe outer diameter
Wind loading	31.3 N at 200 km/h (7 lbf at 125 mph)
Weatherproofing	IPX6
Hardware
Processor	Dual-core ARM Cortex -A53 at 1 GHz
Memory	DDR3L 512 MB
Networking interface	(1) GbE RJ45 port
Max. power consumption	10W
Power method	Passive PoE 4-pairs (1, 2+, 3, 6-) (4, 5+, 7, 8 -)
	Passive PoE 2-pairs (4, 5+, 7, 8 -), for 44-54V DC only
Power supply	48V DC, 0.5A gigabit PoE adapter (included)
	Can be powered by a UISP Router or UISP Switch
Supported voltage range	44-54V DC
GPS	No
Button	Factory reset
LEDs	Power, Ethernet, link
Operating temperature	-40 to 60degrees C (-40 to 140degrees F)
Operating humidity	5 to 95% noncondensing
Certifications	FCC, IC, CE
Software
Operating mode	PtMP station, PtP
Ubiquiti specific features	Wave AI, discovery protocol
Services	UISP, ping watchdog, NTP client, SNMP
Tools	Antenna alignment, discovery utility, ping, trace route, speed test
Network	Bridge/Router* mode
	*Router is available in PtMP station mode only.
Application requirements	UISP web: Version 2.4.61 and later
	UISP mobile iOS : Version 2.32.0 and later
	UISP mobile Android : Version 2.31.9 and later
System
Total throughput	2 Gbps (1 Gbps duplex)
Max. range	Up to 1.3 km (Wave AP)
	Up to 0.9 km (Wave AP Micro)
Encryption	WPA2-PSK (AES)
RF
Operating frequency	57-71 GHz
	*Depends on regulatory region.
Channel bandwidth	2160, 1080 MHz
Operating channels	58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200 MHz
	*Depends on regulatory region.
Modulation	16QAM, QPSK
Antenna gain	27.7 dBi
Polarization	Vertically linear
Beamwidth	Azimuth: 3 dB 6degrees
	Elevation: 3 dB 6degrees
Back-Up RF
WiFi standard	802.11ax (WiFi 6)
Operating frequency
US/CA	U-NII-1 5150 - 5250 MHz
	U-NII-2A 5250 - 5350 MHz
	U-NII-2C 5470 - 5725 MHz
	U-NII-3 5725 - 5850 MHz
Worldwide	5180 - 5875 MHz
	*Depends on regulatory region.
Channel bandwidth	20, 40, 80 MHz
Modulation	BPSK (1⁄2), QPSK (1⁄2), QPSK (3⁄4), 16QAM (1⁄2), 16QAM (3⁄4), 64QAM (2⁄3), 64QAM (3⁄4), 64QAM (5⁄6), 256QAM (3⁄4), 256QAM (5⁄6), 1024QAM (3⁄4), 1024QAM (5⁄6)
Antenna gain	9 dBi
Polarization	Dual-linear
Beamwidth	Azimuth: 3 dB 50degrees
	Elevation: 3 dB 50degrees
Cross-pol isolation	15 dB
LEDs
Power	Flashing white: bootup in progress
	White: not connected to UISP application
	Blue: connected to UISP application
	Flashing blue: locate in progress
	Blue/white: firmware upgrade in progress
Ethernet	Flashing blue: Ethernet traffic detected
Links	White: 5 GHz link
	Blue: 60 GHz link