• TSW101 is Teltonika Networks first automotive-dedicated unmanaged switch.
• Equipped with five Gigabit Ethernet ports, four of which support IEEE802.3af and IEEE802.3at PoE+ standards.
• A wide range of supported power supply voltages (9-30 VDC), and a compact size allow it to slot into many automotive applications.
• Classified as a power source equipment (PSE), this device enables power supply centralization - providing up to 30 watts per single port and maximum output power of 60 watts.
• 10/100/1000 Mbps Ethernet ports for streamlined, high-bandwidth solutions.
• Ideal for providing both: in-vehicle power and an Ethernet data connection simultaneously.

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	TSW101
INTERFACES
Ethernet	5 x RJ45 ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
POE
PoE ports	Port 1- 4
PoE standards	802.3af and 802.3at
PoE Max Power per Port (at PSE)	30 W
Total PoE Power Budget (at PSE)	60 W
Maximum Ethernet cable length	100 m
PERFORMANCE SPECIFICATIONS
Bandwidth (Non-blocking)	10 Gbps
Packet buffer	128 KB
MAC address table size	2K entries
Jumbo frame support	9216 bytes
POWER
Connector	2-pin industrial DC power socket
Input voltage range	9-30 VDC
Input voltage range for PoE	9-30 VDC
Power consumption	Idle: 0.64 W / Max: 2.31 W / PoE Max: 60 W
PHYSICAL INTERFACES (PORTS, LEDS)
Ethernet	5 x RJ45 ports, 10/100/1000 Mbps
Status LED's	1 x Power LED, 10 x LAN status LED's
Power	1 x 2-pin industrial DC power socket
Ground	1 x Grounding screw
PHYSICAL SPECIFICATION
Casing material	Aluminum housing
Dimensions (W x H x D)	115 x 32 x 95 mm
Weight	354 g
Mounting	DIN rail or wall mounting (additional kit needed), flat surface placement
OPERATING ENVIRONMENT
Operating temperature	-40 °C to +75 °C
Operating humidity	10 % to 90 % non condensing
Ingress Protection Rating	IP30
CERTIFICATION & APPROVALS
Regulatory	CE, REACH, RoHS, WEEE
	TSW101 CE
	TSW101 UKCA
	TSW101 FCC
	TSW101 IC
	TSW101 CB
	TSW101 RCM
	E-Mark
SAFETY
Standards	EN IEC 62368-1:2020+A11:2020