Overview:

TS-264 is a compact 2-bay NAS with superior performance. Supporting up to 22 TB storage and 4 TB M.2 SSD caching* at an affordable price, the TS-264 fulfills your multitasking challenges for file management, backup, collaboration, and video conversion.

Features:

2.5GbE is a must!
TS-264 is as fast as a single-port 10GbE NAS with up to 589 MB/s transfer speeds by setting port trunking with the two built-in 2.5GbE (2.5G/1G/100M) ports.

Quad-core for multitasking
Perform additional tasks, stream more media, and have more services running with an Intel® quad-core processor optimized for multitasking.

Smooth video conversion
Built-in GPU for enhanced video conversion, allowing videos to be smoothly streamed from the NAS to mobile devices.

Upgrade to dual-port 10GbE
Futureproof your network connection by installing a PCIe dual-port 10GbE network card that delivers up to 1,644 MB/s transfer speed.

Faster USB transfer
Two USB 3.2 Gen 2 (10Gbps) ports allow faster backup to/from USB devices.

More M.2 NVMe SSDs
If two M.2 slots aren’t enough, install a QM2 PCIe expansion card for more M.2 SSD slots.

2.5GbE NAS is a must in 2023
With increasing availability on switches, motherboards, and laptops, 2023 is the year of 2.5GbE. By setting port trunking with the two built-in 2.5GbE (2.5G/1G/100M) ports to unleash network potential and increase fault tolerance, the TS-264 delivers up to 589 MB/s transfer speeds for fast data access workflow.

Processor
Intel® Celeron® N5095 quad-core processor, burst up to 2.9 GHz

GPU
Built-in Intel® UHD Graphics to speed up video processing and graphical computing

Memory
Built-in 8 GB DDR4 memory

Encryption Engine
Features Intel® AES-NI 256 hardware-accelerated encryption to boost system performance while securing sensitive data.

Accelerate AI–powered image recognition and caching with TPU and PCIe expansion
TS-264 has two M.2 PCIe Gen 3 slots for installing NVMe SSD (including Apacer®, Micron®, Seagate®, WD®, and more) or Edge TPU.

Install M.2 NVMe SSDs for cache acceleration or efficient tiered storage
If you have a huge number of small files requiring read/write operations, you can easily boost IOPS of TS-264 by configuring its two M.2 SSDs as a cache disk. When transmitting bigger files, you can create a storage pool with two M.2 SSDs. With Qtier automatically moving hot data to SSD and cold data to hard drives, TS-264 allows you to enjoy exceptional application performance.

Accelerate AI–powered image recognition with TPU
By leveraging a Edge TPU to QNAP AI Core (the AI-powered engine for image recognition), the TS-264 can perform high-speed face and object recognition. Edge TPU enables QuMagie to quickly process thousands of photos with high-speed AI Image recognition and classification, and QVR Face to analyze real-time video for instant facial recognition.

Abundant I/O capabilities with PCIe expansion
QNAP offers a wide range of expansion cards to add versatile functions to your NAS. The TS-264 has one PCIe Gen 3 x2 slot that supports various expansion cards for expanding application potential.

One Touch Copy backup with USB 3.2 Gen 2
TS-264 provides two 10Gbps USB 3.2 Gen 2 ports for faster file transfer to/from USB 3.2 Gen 2 devices. The One Touch Copy button also allows you to back up the contents of USB devices to the TS-264 with a single button press.

Smoother mobile experience with GPU
Taking a lot of photos with your smartphone? Qfile mobile app will help you free up space by automatically backing up photos to the TS-264. With Intel® UHD Graphics, the TS-264 greatly speeds up converting videos to 1080p / 720p, allowing for smooth streaming to mobile devices over varying mobile network speeds.

Use your NAS like a PC
QNAP’s exclusive Virtualization Station enables running multiple Windows®/Linux® virtual machines. By connecting a keyboard, mouse, and HDMI™ monitor, you can easily use the TS-264 as a PC.

QTS 5, Fast, smooth, and easy-to-use!
The TS-264 comes with the QTS 5 operating system as standard, providing a next-generation usage experience with an updated system kernel, optimized user interface, and advanced security features.

Brighter. Smoother. You’ll like it.
When navigating QTS 5, you will notice a finer attention to detail for a superior browsing experience. Enjoy a smoother NAS experience, comfortable visual design, and find your favorite apps quicker.

Get started with the notice board
When performing first-time installation, the notice board guides you through the setup process. Simply follow the step-by-step instructions for a quick and easy setup.

Smooth and reactive user interface
Whether clicking buttons, switching between apps, expanding/collapsing windows – every action is much smoother. The search bar in the main menu also assists in quickly finding desired apps.

Simple Backup
Superior hardware performance with an all-in-one Backup Solution to speed up backup/recovery tasks.

PC and Mac backup
Sync your computer files to NAS with Qsync. TS-264 also supports Time Machine for Mac computers.

License-free VM backup
Back up multiple VMware® and Hyper-V™ VMs using Hyper Data Protector.

File server backup
Supports multiple protocols such as Rsync, FTP and CIFS for backing up different file servers.

SaaS Business Backup Solution
Use Boxafe to easily back up Google™ Workspace and Microsoft 365® business account data.

Google Photos and WordPress backup
The exclusive MARS service enables backing up Google Photos and WordPress databases and files to NAS.

Back up data from one NAS to another NAS
Back up data on a local NAS to another remote NAS using Hybrid Backup Sync. You can also deduplicate your backup using QuDedup to save time and storage space.

Back up NAS data to the Cloud
Hybrid Backup Sync supports mainstream public cloud services for backing up or syncing data from NAS to Cloud.

Cloud Storage Gateway
VJBOD Cloud connects cloud object storage (Bucket) and back up data from NAS to the cloud.

Back up NAS snapshots
Use Snapshot Replica to back up NAS snapshots to another NAS and recover when needed.

Smart storage
QNAP’s exclusive apps provide easy-to-use file storage and collaboration tools. Snapshots also help protect important data from Ransomware.

Volume and LUN snapshots
”Snapshots” record the complete status of your NAS system and data. Certain data and files can be reverted when needed.

Versioning
Regularly create snapshots. The more snapshots you have, the lower the risk of data loss.

Smart snapshot space management
QNAP supports smart snapshot space management to ensure there is enough storage space for new snapshots.

Qsync
Sync files between NAS and multiple computers or mobile devices.

Qsirch
Quickly find documents, media files, and emails using key words, colors, or faces.

Qfiling
Create filing rules and set schedules to automatically archive files into dedicated folders based on their category.

QuMagie
TS-264 leverages powerful AI photo management and creates smart photo albums based on people, objects, locations, and events, making photos easy to find and share.

Smart surveillance
TS-264 provides a professional surveillance NAS solution, compatible with 6,000+ IP cameras of 190+ brands and thousands of ONVIF network cameras.

All-in-one surveillance
Say goodbye to expensive and complicated PC NVR. QNAP’s integrated surveillance NAS solution offers a subscription licensing solution or perpetual licensing solution for flexible deployment based on your needs.

Connect to HDMI™ monitor
TS-264 supports has HDMI™ output for direct surveillance video playback, removing the need for a dedicated workstation.

Surveillance failover
Install the high-availability QVR Guard app to automatically takeover recording tasks if a QVR Pro server fails.

Live surveillance video monitoring
Monitor live feeds and receive alert event notifications from client applications on PCs or mobiles.

Large-scale central management
Centrally control up to 256 Surveillance NAS (licenses sold separately) in different locations via QVR Center.

AI surveillance event search
Instead of manually searching through a whole day of event videos, QVR Smart Search helps you efficiently search through hundreds of hours of video recordings from hundreds of cameras to find specific events.

MP4 surveillance videos
With GPU-accelerated video conversion, surveillance videos can be converted to various file formats or resolutions for smooth playback on multiple devices.

All-in-one solution for hosting virtual machines and containers
By running multiple virtual machines and containers on the TS-264, you can deploy multi-tenant environments and applications to increase management efficiency and save hardware costs. Coupled with the Network & Virtual Switch app that boosts interoperability between virtual machines, containers, QNAP NAS, and other physical devices on the network, you can flexibly allocate physical and virtual network resources to simplify network deployment.

Virtualization Station
Run multiple Windows®, Linux®, UNIX®, Android™, and QuTScloud virtual machines and access them via a web browser or Virtual Network Computing (VNC).

Container Station
Experience Docker®, LXD, and Kata Containers lightweight virtualization technologies, download apps from the built-in Docker Hub Registry®, import/export containers, and create abundant microservices.

Linux Station
Run Linux® applications directly on the NAS and remotely access the Linux® desktop from a web browser. The open-source Linux® platform is also ideal for Internet of Things development.

Enhanced cybersecurity and data protection
TS-264 is loaded with comprehensive privilege settings and security measures. Besides, there are abundant apps that help ensure optimal NAS protection against threats like malware and hackers.

Account security
Supports Azure Active Directory Domain Services (Azure AD DS), LDAP, and Windows ACL to help IT staff efficiently manage user accounts and access rights for multiple NAS systems. Use 2-Step Authentication for all user accounts to protect against brute force attacks.

Secure remote access
myQNAPcloud Link allows convenient remote connection to NAS through the Internet. Or you can use QVPN to set up a VPN connection to the NAS with enhanced security.

NAS Firewall
QuFirewall restricts and blocks suspicious packets sent by proxy servers and the onion routing (Tor) based on user rules. QuFirewall also dynamically updates its block list based on detected malicious packets.

Malware Protection
Regularly scan your TS-264 using the latest malware definitions. If infected files are detected, they are immediately removed to ensure NAS data security.

A health check for your hard drives
Hard drives are at the heart of your NAS, and ensuring their long-term health and reliability is absolutely crucial. QNAP provides various methods and tools to help you monitor hard drive health, ensuring that you can take proactive decisions to safeguard your data and files.

S.M.A.R.T. and back block scanning
If any of the S.M.A.R.T. values are reported as abnormal, or bad blocks are detected, you can take early action and replace drives before potential data loss occurs.

DA Drive Analyzer
The DA Drive Analyzer leverages ULINK cloud-based AI to predict the expected lifespan of drives, assisting you in planning future drive replacements to protect against NAS downtime and data loss.

Seagate® IronWolf™ Health Management
When using supported IronWolf™ or IronWolf Pro™ hard drives, overall system reliability is improved by providing you with actionable prevention, intervention, and recovery options.

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	TS-264-8G
Hardware Details
CPU	Intel Celeron N5095 4-core/4-thread processor, burst up to 2.9 GHz
CPU Architecture	64-bit x86
Graphic Processors	Intel UHD Graphics
Floating Point Unit	Yes
Encryption Engine	Yes(AES-NI)
Hardware-accelerated Transcoding	Yes
System Memory	8 GB RAM
Maximum Memory	8 GB
Flash Memory	4GB (Dual boot OS protection)
Drive Bay	2 x 3.5-inch SATA 6Gb/s
	The system is shipped without HDD.
Drive Compatibility	3.5-inch SATA hard disk drives
	2.5-inch SATA solid state drives
Hot-swappable	Yes
M.2 Slot	2 x M.2 2280 PCIe Gen 3 x1
	Compatible with NVMe SSD PCIe Gen 3 and above.
SSD Cache Acceleration Support	Yes
2.5 Gigabit Ethernet Port (2.5G/1G/100M)	2 (2.5G/1G/100M/10M)
5 Gigabit Ethernet Port (5G/2.5G/1G/100M)	Optional via PCIe expansion card
10 Gigabit Ethernet Port	Optional via PCIe expansion card
Wake on LAN (WOL)	Yes
Jumbo Frame	Yes
PCIe Slot	1
	Slot 1: PCIe Gen 3 x2
	Card dimensions for PCIe slot : 190 x 68.9x 18.76 mm / 7.48 x 2.71 x 0.74 inches.
USB 2.0 port	2
USB 3.2 Gen 2 (10Gbps) Port	2 x Type-A
IR Sensor	Yes, (Optional QNAP RM-IR004 remote control)
HDMI Output	1, HDMI 2.1 (up to 4096 x 2160 @ 60Hz)
Form Factor	Tower
LED Indicators	Power/Status, LAN, USB, HDD1-2
Buttons	Power, USB copy, Reset
Dimensions (HxWxD)	165 x 105 x 226.5 mm
	Dimensions do not include foot pad (foot pad may be up to 30mm / 1.18 inches high depending on model)
Weight (Net)	2.61 kg
Weight (Gross)	2.61 kg
Operating Temperature	0 - 40 °C (32°F - 104°F)
Storage Temperature	-20 - 70°C (-4°F - 158°F)
Relative Humidity	5-95% RH non-condensing, wet bulb: 27°C (80.6°F)
Power Supply Unit	60W adapter, 100-240V
Power Consumption: HDD Sleep Mode	18.288 W
Power Consumption: Operating Mode, Typical	29.086 W
	Tested with drives fully populated.
Fan	1 x 70mm, 12VDC
System Warning	Buzzer
Kensington Security Slot
Standard Warranty	3
Max. Number of Concurrent Connections (CIFS) - with Max. Memory	1500
Software Details
Operating System	QTS 5.1.3
Supported Client Operating Systems	1. Apple Mac OS 10.10 or later
	2. Ubuntu 14.04, CentOS 7, RHEL 6.6, SUSE 12 or later Linux
	3. IBM AIX 7, Solaris 10 or later UNIX
	4. Microsoft Windows 7, 8, 10 and 11
	5. Microsoft Windows Server 2008 R2, 2012, 2012 R2, 2016, 2019 and 2022
Supported Browsers	1. Apple Safari (latest version)
	2. Google Chrome (latest version)
	3. Microsoft Edge (latest version)
	4. Mozilla Firefox (latest version)
Supported Languages	Chinese (Traditional & Simplified), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese (Brazil), Romanian, Russian, Spanish, Swedish, Thai, and Turkish
Storage Pool	Yes
SED Storage Pool	Yes
Maximum Pool size	308 TB
Maximum number of storage pool	128
Volume Type	Thick, Thin, Static
Maximum volume size	250 TB
	Note: At least 4 GB RAM is required.
Maximum number of volume	128
Maximum shared folder size	250 TB
Maximum number of shared folder	512
JBOD Expansion	Yes
VJBOD / VJBOD Cloud	Yes
iSCSI Service	Yes
Fibre Channel Service	Yes
LUN Type	Thick, Thin
File-based iSCSI LUN	Yes
Block-based iSCSI LUN	Yes
Maximum LUN size	250 TB
	Note: At least 4 GB RAM is required.
Maximum number of targets LUN	128
LUN feature	1. LUN Mapping (LUN can be moved between iSCSI and FC)
	2. LUN Masking
	3. WWPN Aliases Import/Export
	4. FC Port Group
	5. FC Port Binding
	6. Multipath IO (MPIO)
	7. Online LUN capacity expansion
	8. LUN snapshot
	9. LUN snapshot replication and clone
Auto Tiering	Yes
	Requires minimum 2GB memory.
RAID Type	1. 8-bay (and more): JBOD, Single, RAID 0, 1, 5, 6, 10, 50, 60
	2. 6-bay: JBOD, Single, RAID 0, 1, 5, 6, 10, 50
	3. 4-bay: JBOD, Single, RAID 0, 1, 5, 6, 10
	4. 2-bay: JBOD, Single, RAID 0, 1
RAID Group	Yes
	To ensure data security, system stability, and storage performance, the maximum number of drives for a single RAID group is now 16 (applicable to RAID 5, RAID 6, RAID TP, and subgroups of RAID 50 and RAID 60). Nevertheless, users can combine multiple RAID groups into a large storage pool that contains more than 16 drives, using RAID 50, RAID 60, or RAID 10 as the RAID configuration. This enhancement will only be applied to new RAID groups. All existing RAID groups and storage systems will not be affected.
RAID Level Migration	Yes
RAID Expansion (by adding Disk)	Yes
RAID Expansion (by replacing bigger Disks)	Yes
Storage Pool Expansion (by adding RAID Group)	Yes
RAID Hot Spare	Global, Local
RAID Sync/Rebuild/Scrubbing	Yes
Internal drive	EXT4
External drive	EXT3, EXT4, NTFS, FAT32, HFS+, and exFAT (optional for ARM model)
	Note: To use exFat in certain models you must purchase an exFAT driver license from License Center.
Disk, Enclosure Locate	Yes
Disk S.M.A.R.T. Scan	Yes
Disk S.M.A.R.T. Data Migration	Yes
Ironwolf Health Management	Yes
Secure Erase	Yes
SSD Trim	Yes
SSD Life Estimation	Yes
Disk Roaming	Yes
Disk Standby	Yes
Volume Snapshot	Yes
LUN Snapshot	Yes
Minimum Snapshot Interval	5 minutes
Snapshot Retention Policy	Yes
Self-serve Snapshot Recovery	Yes
Application Consisted Snapshot	Yes
Snapshot Full Clone	Yes
Snapshot Replica / Vault	Yes
SSD read-only Cache	Yes
SSD read-write cache	Yes
SSD write-only cache	Yes
SSD Cache Maximum Size	Check your QNAP NAS cache capacity and RAM requirements
SSD Cache RAID	0, 1, 5, 6, 10
SSD profiling tool	Yes
External Device Management	Yes
Mount Smart Phone (MTP)	Yes
External RAID Device (QNAP so on) Management (External Device Mode)	Yes
External RAID Device (QNAP so on) Management (NAS Mode)	Yes
File Server	1. File sharing across Windows, Mac, and Linux/UNIX
	2. Microsoft networking (CIFS/SMB)
	3. Apple networking (AFP)
	4. NFS version 3/4 services
FTP Server	1. QuFTP
	2. FTP, SFTP and TFTP protocols
	3. FTP over SSL/TLS (explicit FTPS)
	4. FXP support
Maximum FTP connection	1024
File Station (Web)	Yes
Object Storage	Yes
Local user account	4, 096
Local group account	512
Domain user/group account	200, 000
Domain Security	Yes
Domain Controller	Yes
Shared folder permission	Yes
Advanced folder permission	Yes, (AFP, CIFS/SMB, FTP, and File Station)
Windows ACL	Yes, (CIFS/SMB)
User quota	Yes
Group quota	Yes
Folder quota	Yes, (Snapshot shared folder)
Home folder	Yes
Resource Monitor	Yes
SNMP	V2, V3
Network recycle bin	1. Recover files deleted using AFP, CIFS/SMB, and File Station
	2. Automatic cleanup and file type filter
System Log & Notification Center	Log recording: 3,000 event per second
Smart Fan	Yes
Schedule on/off	Yes
Internet protocol	IPv4, IPv6
Virtual Switch	Yes
Port trunking	Yes, (7 modes)
VLAN	Yes
DHCP Server	Yes
DDNS (Dynamic Domain Name Service)	Yes
Network access protection with auto-blocking	SSH, Telnet, HTTP(S), FTP, CIFS/SMB, and AFP
Security Counselor	Yes
Malware Remover	Yes
AES 256-bit Volume Encryption validated by FIPS 140-2 CAVP	Yes
2-step verification	Yes
Allow/Deny List	Yes
Access Protection	Yes
Service binding	Yes
Firewall	Yes
vSphere Web Client Plug-in	Yes
VMware vSphere VAAI for iSCSI	Yes
VMware vSphere VAAI for NAS	Yes
Windows ODX	Yes
Windows/VMware Snapshot Agent	Yes
HTTP/HTTPS Connections	TLS 1.0/1.1/1.2/1.3
Supports WebDAV Connection	Yes
Supports Virtual Hosts	32
Qsync	Yes
	Note: At least 1 GB RAM is required.
[Qsync] Management Mode	User customization, Central
[Qsync] Qsync client supported platforms	Windows, macOS, Ubuntu, Android, and iOS
[Qsync] Maximum number of version control	64
HybridMount	Yes
	Note: At least 1 GB RAM is required.
[HybridMount] File Cloud Gateway	Concurrent Connections = 20 Upload & 20 Download
[HybridMount] Network Drive Mount	Yes
[HybridMount] Free cloud gateway sessions	2
HBS (Hybrid Backup Sync)	Yes
	Note: At least 1 GB RAM is required.
[HBS (Hybrid Backup Sync)] NAS to NAS backup	Yes
[HBS (Hybrid Backup Sync)] Cloud Backup	Yes
[HBS (Hybrid Backup Sync)] Cloud Sync	Yes
[HBS (Hybrid Backup Sync)] 2-way and Active Sync	Yes
[HBS (Hybrid Backup Sync)] Backup Deduplication	Yes
[HBS (Hybrid Backup Sync)] Apple Time Machine Backup	Yes
[HBS (Hybrid Backup Sync)] External drive backup	Yes
[HBS (Hybrid Backup Sync)] Maximum number of backup job	400
Hyper Data Protector	Yes
Boxafe	Yes
	Note: At least 4 GB RAM is required.
[Boxafe] Office 365 Backup	Yes
[Boxafe] Google Workspace Backup	Yes
[Boxafe] Full-text search	Yes
Qsirch	Yes
	Note: This feature is supported by all QNAP NAS devices with at least 2 GB of memory
[Qsirch] Previews	Photos, music, videos, PDFs, Gmail, and others
[Qsirch] Integrate Mac Finder	Yes
[Qsirch] Advanced picture search	Yes
[Qsirch] Search filters	Yes
	Yes
	Note: At least 1 GB RAM is required.
[QuMagie] Browse photos	Yes
[QuMagie] Virtual and smart albums	Yes
[QuMagie] AI-assisted photo management	People, things, places, and others
Antivirus (free)	Yes
McAfee (License)	Yes
QVPN Service	Yes
	Note: At least 1 GB RAM is required.
[QVPN Service] Remote Access	PPTP, L2TP/IPSec, OpenVPN, WireGuard, QBelt (QNAP proprietary)
[QVPN Service] Supportedd utility and mobile app	Windows, macOS, iOS, and Android
[QVPN Service] Supported maximum clients	100
HD Station	Yes
LDAP Server	Yes
RADIUS	Yes
SQL server	Yes
License Center	Yes
Multimedia Console	Yes
Photo Station	Yes
Music Station	Yes
Video Station	Yes
Download Station	Yes
Notes Station	Yes
Qfiling	Yes
Media Streaming add-on	Yes
QmailAgent	Yes
QuWAN	Yes
DA Driver Analyzer	Yes
Q'center	Yes
	Note: The application is available in the App Center and in virtual appliance marketplaces (VMware vSphere ESXi and Microsoft Hyper-V).
Q'center Server	Yes
Q'center Agent	Yes
Connect to Q'center	Yes
Virtualization Station	Yes
	Note: At least 4 GB RAM is required.
[Virtualization Station] Supports Virtual machine instances	Windows, Linux, Unix, and Android
[Virtualization Station] VM importing, exporting, cloning, snapshot capturing, backup, and restoration	All function is Fine.
[Virtualization Station] Virtual switches	Can create a virtual switch
[Virtualization Station] GPU pass-through	Not support GPU
[Virtualization Station] Suggested number of virtual machine instances	4
	The actual number of virtual machine instances may vary by the memory installed on NAS (e.g. 1 VM= 1 thread for 1 vCPU and 1GB memory). Please expend memory if needed.
Container Station	Yes
	Note: At least 1 GB RAM is required.
[Container Station] Supported type	LXC/LXD and Docker
	Note: LXD has been supported after Container Station 2.4
[Container Station] Docker Hub Registry	Yes
[Container Station] Container importing and exporting	Yes
[Container Station] Console mode	Yes
Linux Station	Yes
	Notification: At least 4 GB RAM is required.
[Linux Station] Supports Ubuntu versions	18.04, and 20.04
Linux Station Center	Yes
QVR Pro	Yes
	Note: At least 4 GB RAM is required. The maximum number of channels supported varies by NAS model, network configuration, and camera settings.
[QVR Pro] Recording Technique	Index database based
[QVR Pro] License Type	Perpetual
[QVR Pro] User-defined trigger events	Yes
[QVR Pro] Metadata	Yes
[QVR Pro] QVR Pro Client (Desktop)	Windows, macOS, and QNAP HybridDesk Station
[QVR Pro] QVR Pro Client (Mobile)	Android and iOS
[QVR Pro] Recording camera streams	H.264
[QVR Pro] Free built-in camera channels	8
QVR Elite	Yes
	Note: At least 1 GB RAM is required. The maximum number of channels supported varies by NAS model, network configuration, and camera settings.
[QVR Elite] Recording Technique	Standard MP4 file based
[QVR Elite] License Type	Subscription-based
[QVR Elite] User-defined trigger events	Yes
[QVR Elite] QVR Pro Client (Desktop)	Windows, macOS, and QNAP HybridDesk Station
[QVR Elite] QVR Pro Client (Mobile)	Android and iOS
[QVR Elite] Recording camera streams	H.264
[QVR Elite] Free built-in camera channels	2
QVR Pro Client	Yes
[QVR Pro Client] Dynamic View Layout	Yes
[QVR Pro Client] Windows	Yes
[QVR Pro Client] Mac	Yes
[QVR Pro Client] HybridDesktop	Yes
[QVR Pro Client] iOS	Yes
[QVR Pro Client] Android	Yes
QVR Center	Yes
	Note: At least 4 GB RAM is required.
[QVR Center] Log management	Yes
[QVR Center] Central monitoring across multiple servers	Yes
QVR Guard	Yes
	Note: At least 4 GB RAM is required.
[QVR Guard] Failover design	Yes
[QVR Guard] Viewing task details	Yes
[QVR Guard] Automatic switch between Standby and Takeover modes	Yes
QVR Human	Yes
QVR Face	Yes
	The maximum number of channels supported varies by NAS model, network configuration, and camera settings.
QVR DoorAccess	Yes