Overview

EAP603-Outdoor AX1800 Indoor/Outdoor Wi-Fi 6 Access Point
Seamless 1.8 Gbps Wi-Fi 6 speeds with up to 574 Mbps on 2.4 GHz and 1201 Mbps on 5 GHz. Dual-band omnidirectional coverage reaches up to 300 m (984 ft), making it suitable for extending reliable wireless connectivity across outdoor areas.

The EAP603-Outdoor supports 802.3at PoE and Passive PoE, with the required passive PoE adapter included. Its IP65 weatherproof design, 6 kV lightning protection and wide operating temperature range make it suitable for demanding outdoor environments. Wall and pole mounting options provide flexible installation, while Omada SDN simplifies network deployment and management.

Description

The TP-Link EAP603-Outdoor AX1800 is a Wi-Fi 6 access point designed to provide fast, stable wireless coverage in outdoor and challenging indoor environments. With dual-band wireless speeds of up to 1.8 Gbps, external omnidirectional antennas and high-power amplification, it can deliver broad coverage across areas such as farms, yards, swimming pools, outdoor cafes, sheds and parks.

The access point combines Wi-Fi 6 technologies such as OFDMA, MU-MIMO, 1024 QAM and HE 80 for improved wireless efficiency and performance. It also supports Omada Mesh and seamless roaming, allowing compatible devices to move between access points while automatically connecting to the strongest available signal.

Features

Fast Wi-Fi 6 Connectivity
The EAP603-Outdoor provides high-speed dual-band wireless networking for busy environments where reliable connectivity is required. The 5 GHz band delivers up to 1201 Mbps, while the 2.4 GHz band provides up to 574 Mbps.

Key wireless technologies include:

• Up to 1201 Mbps on 5 GHz
• Up to 574 Mbps on 2.4 GHz
• 1024 QAM
• HE 80
• MU-MIMO
• OFDMA
• Wi-Fi 6 connectivity

Wide Omnidirectional Outdoor Coverage
Two external antennas and high-power amplifiers help provide broad omnidirectional wireless coverage. Depending on the environment and installation conditions, coverage can reach up to 200 m on 2.4 GHz and up to 300 m on 5 GHz.

This makes the EAP603-Outdoor a practical choice for extending Wi-Fi beyond the main building and into outdoor areas such as:

• Yards
• Farms
• Sheds and barns
• Swimming pools
• Outdoor cafes
• Parks

Actual wireless coverage will vary depending on building materials, interference, mounting position, client devices and environmental conditions.

Weather-Resistant Outdoor Design
Built for outdoor deployment, the EAP603-Outdoor features an IP65-rated enclosure designed to protect against dust and water. It also provides 6 kV lightning protection and a wide operating temperature range from -40 C to +70 C, helping it remain reliable in demanding weather conditions.

Wind resistance and the sealed enclosure further support installation in exposed outdoor locations.

Flexible PoE Installation
Power and network connectivity can be supplied through PoE, helping simplify installation where running a separate electrical connection is impractical. The access point supports both 802.3at PoE and Passive PoE.

Deployment options include:

• 802.3at PoE through a compatible PoE+ switch
• Passive PoE using the supplied adapter
• 1 x Gigabit Ethernet PoE+ port
• Wall or pole mounting

Omada Mesh and Seamless Roaming
Omada Mesh allows compatible access points to work together to extend wireless coverage without requiring every access point to have a direct wired connection. Seamless roaming helps clients automatically transition to the access point offering the optimal signal as they move around the network.

This is useful for larger properties and business environments where users need consistent Wi-Fi while moving between indoor and outdoor coverage areas.

Centralised Omada Network Management
The EAP603-Outdoor works with the TP-Link Omada SDN platform, allowing compatible access points, managed switches and gateways to be centrally managed. Automatic device identification and one-click adoption can simplify installation and network configuration.

Centralised cloud management is particularly useful for businesses and larger deployments where multiple network devices need to be monitored and managed from one platform.

Key Technical Details

• Model: TP-Link EAP603-Outdoor
• Wireless standard: Wi-Fi 6
• Wireless class: AX1800
• 5 GHz speed: Up to 1201 Mbps
• 2.4 GHz speed: Up to 574 Mbps
• Ethernet: 1 x Gigabit Ethernet PoE+ port
• Antennas: 2 x external omnidirectional antennas
• Power: 802.3at PoE and Passive PoE
• Passive PoE adapter: Included
• Protection: IP65 weatherproof and 6 kV lightning protection
• Mounting: Wall and pole mounting
• Bluetooth: Supported
• Mesh: Omada Mesh
• Roaming: Seamless roaming
• Management: Omada SDN and centralised cloud management
• Operating temperature: -40 C to +70 C

Part Number and SKU
The part number / SKU for this TP-Link outdoor Wi-Fi 6 access point is TP-EAP603-O. This identifies the EAP603-Outdoor model for ordering, stock control and product selection.

Reliable Wi-Fi for Outdoor Areas
The TP-Link EAP603-Outdoor AX1800 combines Wi-Fi 6 performance, long-range omnidirectional coverage, PoE flexibility and rugged outdoor protection in a compact access point. It is well suited to homes, farms, commercial properties and business installations that require dependable wireless connectivity across outdoor spaces.

Specifications

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	TP-EAP603-O
HARDWARE FEATURES
Interface	1 x 10M/100M/1000Mbps Gigabit Ethernet Port (RJ45) , PoE in
	1 x Grounding Termina
Button	1 x Reset button: Press the button for longer than 5 seconds to make the device restore to factory settings.
Power Supply	Input: 802.3at PoE+: 42.5 - 57 V, 0.36A
Max. Power Consumption	802.3at (PoE+): 15.8w, 2.4GHz radio 2 x 2, 5GHz radio 2 x 2, wired link rate can be up to 1 Gbps, etc.
	Idle mode: 4.8W(PoE)
Dimensions ( W x D x H )	Main Unit: 230 x 207.5 x 69.7 mm (9.06 x 8.17 x 2.74 in.)
	Shipping Unit: 324 x 104 x 245 mm (12.76 x 4.09 x 9.65 in.)
Antenna	Wi-Fi
	2.4 GHz: 2 x 4 dBi (peak gain), external omnidirectional antennas
	5 GHz: 2 x 5 dBi (peak gain), external omnidirectional antennas
	*Note: The gains above are the single-antenna peak gains.
	IoT
	Bluetooth: 1 x 4 dBi (peak gain), internal omnidirectional antennas
Bluetooth	Yes
Weatherproof Enclosure	IP66 for Wall Mount
	IP65 for Pole Mount
Mounting	Pole Mount (Kits included)
	Wall Mount (Kits included)
Management Features
Omada App	Yes
Restore & Backup	Yes
Firmware update via Web	Yes
NTP	Yes
Centralized Management	Omada Hardware Controller
	Omada Software Controller
	Omada Central (Cloud-Based)
	Omada App
Cloud Access	Yes. Require the use of an Omada controller.
Email Alerts	Yes
LED ON/OFF Control	Yes
Management MAC Access Control	Yes
SNMP	v1, v2c, v3
SSH	Yes
Web-based Management	Yes
WIRELESS FEATURES
Coverage	2.4 GHz: up to 2,150 ft (200 m)
	5 GHz: up to 3,200 ft (300 m)
Wireless Standards	5 GHz: IEEE 802.11a/n/ac/ax
	2.4 GHz: IEEE 802.11b/g/n/ax
Frequency	5 GHz
	2.4 GHz
Signal Rate	2.4 GHz: up to 573 Mbps
	5 GHz: up to 1201 Mbps
	*Note: Country-Specific Restriction Apply
Wireless Functions	Maximum number of BSSIDs: 16 (8 on each band)
	Maximum number of associated STAs: 250+
	Guest Network
	ACS (Automatic Channel Selection)
	Airtime Fairness
	Band Steering
	802.11 Rate Control
	Rogue AP Detection
	URL Filtering
	WLAN Optimization
	Lock to AP
	SSID/Client Rate Limit
	Load Balance
	Seamless Roaming (802.11k/v/r, Non-Stick Roaming, Ping-Pong Roaming Suppression, AI Roaming)§
	Multicast/Broadcast Management (Multicast-to-Unicast Conversion, ARP-to-Unicast Conversation, Multicast Filtering, Multicast/Broadcast Rate Limit)
	QoS (Quality of Service)
Wireless Security	ACL
	MAC Filter
	802.1X Authentication
	MAC-Based Authentication
	WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise, Enhanced Open, and None
	Radius Accounting
	PPSK without Radius, PPSK with Radius (Generic Radius with bound MAC/EKMS/Generic Radius with unbound MAC)
	Captive Portal: No Authentication, Simple Password, Hotspot (Voucher / Local User / SMS / RADIUS / Form Auth), RADIUS Server, External LDAP Server, External Portal Server, Pre-Authentication Access, and Authentication-Free Client
	EAP Types: EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-CHAP, EAP-SIM, EAP-AKA, EAP-GTC, EAP-FAST, EAP-PEAP, EAP-MD5, EAP-MSCHAPv2, PEAPv0, PEAPv1
Transmission Power	Maximum transmit power:
	CE (ERIP)
	2.4 GHz: 20 dBm
	5 GHz: 23 dBm in U-NII-1, 23 dBm in U-NII-2A, 29 dBm in U-NII-2C
	FCC (Conducted Power)
	2.4 GHz: 25 dBm
	5 GHz: 27 dBm in U-NII-1, 24 dBm in U-NII-2A, 24 dBm in U-NII-2C, 27 dBm in U-NII-3
	Minimum transmit power
	CE (ERIP)
	2.4 GHz: 7 dBm
	5 GHz: 6 dBm in U-NII-1, 6 dBm in U-NII-2A, 6 dBm in U-NII-2C, 6
	dBm in U-NII-3
	FCC (Conducted Power)
	2.4 GHz: 4 dBm
	5 GHz: 4 dBm in U-NII-1, 4 dBm in U-NII-2A, 4 dBm in U-NII-2C
	4dBm in U-NII-3
	Adjustable power increment: 1 dBm
	*Note: MIMO combined power, excluding antenna gains. The actual
	transmit power depends on local laws and regulations
OTHERS
Certification	CE, FCC, RoHS
Package Content	EAP603-Outdoor
	Passive PoE Adapter
	Power Cord
	Installation Guide
	Mounting Kit
	Waterproof Kit
Environment	Operating Temperature: -30 degreesC-70 degreesC (-22 degreesF-158 degreesF)
	Storage Temperature: -40 degreesC-70 degreesC (-40 degreesF-158 degreesF)
	Operating Humidity: 10%-90% non-condensing
	Storage Humidity: 5%-90% non-condensing