RBGESP+POE-IN

Overview:

MikroTik's RB-GESPIN is an indoor Gigabit Passive PoE Injector with surge protection and ground wire that can be used to protect networks from lightning or surge damages. The maximum suggested cable length is 40 meters. For maximum protection, it is recommended to use an RB-GESP for outdoor connections and the RB-GESPIN at the other end, for indoor connection.

Features:

GESP+POE-INGESP+ PoE is a passive PoE injector with surge protection. Combine it with the GESP devices for maximum security and peace of mind.

You cant buy safety, but you can buy MikroTik devices to keep your setup safe. Take a look at the GESP product line. It consists of a new revision of the classic MikroTik GESP surge protector and a brand new device - the GESP+POE-IN, a passive PoE injector with surge protection. Together these two devices offer maximum security and peace of mind.

Heres what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protector up there. It comes sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm. Now add the GESP+POE-IN injector below the mast - to protect the switches and to power the antennas.

Dont forget about the grounding wire! Secure it to the rackmount, mast, or any other structure that is connected to the ground. For maximum protection, you should use a surge protector on both ends of long cables.

These small devices can make all the difference when it comes to lightning strikes or static build-up.

The GESP units can usually absorb multiple impacts, but make sure to check their condition after each surge. For attachment of GESP units, we recommend using PVC zip ties. Just dont make it too tight.You know what they say - hope for the best, prepare for the worst. This small investment can save lots of time and money, so why risk it? Grab a GESP & GESP+POE-IN and put your mind at ease!

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	RBGESP+POE-IN
Data Line Protection	RJ45 10/100/1000 Ethernet
DC Spark-Over Voltage	75V @ 100V/s
Discharge Current	3kA (8/20μs)
Ethernet Ports	1x 10/100/1000
Maximum Impulse Spark-Over Voltage	700V @ 1kV/µs
Operating Temperature	-40 to 70°C
PoE Support	Passive
Dimensions	200 x 130 x 40mm