NET-TL-SG1016PE

Overview:

The TL-SG1016PE is an 16-Port Gigabit Desktop/Rack mountable Switch with 8 ports supporting the PoE+ standard. It provides a simple way to expand a wired network by transferring power and data over a single Ethernet Cable. With a total power budget of 110W, up to 30W per port, TL-SG1016PE can power more high-powered devices such as wireless Access Points (APs), IP Cameras or IP Phones. Moreover, with innovative energy-efficient technology, the TL-SG1016PE can save up to 75% of the power consumption, making it an eco-friendly solution for your business network.

8 ports of TL-SG1016PE support Power over Ethernet Plus (PoE+) standard which can automatically detect and supply power to any IEEE 802.3af/at compliant device(s). In this situation, the electrical power is transmitted along with data in a single cable, allowing you to expand your network where there are electrical cables or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones.

Features:

• 16 10/100/1000Mbps RJ45 ports
• Equipped with 8 PoE+ supported ports to transfer data and power over a single cable
• With a total PoE power budget of 110W, up to 30W per port
• Works with IEEE 802.3af/at compliant devices, expanding home and office networks
• Simple network set-up on top of plug-and-play connectivity
• Web-based user interface and management utility simplify configuration

Overload Arrangement
TL-SG1016PE has a priority function which helps protect the system when its power is overloaded. If all PoE+ devices’ power consumption is greater than or equal to 110W, a priority will be arranged among the 16 PoE+ ports, at which point the system will cut off the power of the lowest-priority port. 

Port Priority Function
*Priority (port 1 > port 2 > port 3 > port 4 > port 5 > port 6 > port F > port 8): This function helps protect the system if the power becomes overloaded. For example, if port 1, 2, 4 and 7 are using 30W (maximum power per port is 30W, the system power is 120W in total), and there is an additional device inserted into Port 3 at 25W, the system will cut off the power of Port 7 in response to the power exceeding the 120W limit., This means Port 1, 2 and 4 will use 30W, and Port 3 will use 25W, with no power will be supplied to Port 7 as it has the lowest designated priority among the ports in use.

Easy To Use
TL-SG1016PE is easy to install and use. It requires no configuration or installation. With its Desktop/Rack mountable design, outstanding performance and quality, the TP-LINK TL-SG1016PE 16-Port Gigabit Desktop/Rack mountable Switch with 8-Port PoE is a great choice for expanding your home or office network.

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	NET-TL-SG1016PE
HARDWARE FEATURES
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1q, IEEE 802.1p
Interface	16 10/100/1000Mbps RJ45 Ports
	AUTO Negotiation/AUTO MDI/MDIX
Network Media	10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
	EIA/TIA-568 100Ω STP (maximum 100m)
	100BASE-TX: UTP category 5, 5e cable (maximum 100m)
	EIA/TIA-568 100Ω STP (maximum 100m)
	1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m)
	EIA/TIA-568 100Ω STP (maximum 100m)
Fan Quantity	1
Power Supply	100-240VAC, 50/60Hz
Power Consumption	Maximum: 124.4W (220V/50Hz)
PoE Ports (RJ45)	Standard: 802.3 at compliant
	PoE Ports: Port 1- Port 8
	PoE Power Budget: 110W
Dimensions ( W x D x H )	11.6*7.1*1.7 in. (294*180*44 mm)
PERFORMANCE
Switching Capacity	32Gbps
Packet Forwarding Rate	23.8Mbps
MAC Address Table	8K
Packet Buffer Memory	4.1Mbit
Jumbo Frame	9KB
SOFTWARE FEATURES
Quality of Service	Support Port-Based/802.1p/DSCP priority
	Support 4 priority queues
	Rate Limit
	Storm Control
L2 Features	IGMP Snooping V1/V2/V3
	Link Aggregation
	Port Mirroring
	Cable Diagnostics
	Loop Prevention
VLAN	Supports up to 128 VLANs simultaneously (out of 4K VLAN IDs)
	MTU/Port/Tag VLAN
Management	Web-based GUI
	Easy Smart Configuration Utility
Transmission Method	Store-And-Forward
OTHERS
Certification	FCC, CE, RoHS
Package Contents	TL-SG1016PE
	Power Cord
	Installation Guide
	Resource CD
	Rackmount Kit
	Rubber Feet
System Requirements	Microsoft Windows for running Utility
Environment	Operating Temperature: 0°C~40°C (32°F~104°F)
	Storage Temperature: -40°C~70°C (-40°F~158°F)
	Operating Humidity: 10%~90% non-condensing
	Storage Humidity: 5%~90% non-condensing