The Hikvision DS-3E1518P-SI-16P2F is a 16 port Gigabit Smart PoE switch designed for reliable network connectivity and efficient power delivery to compatible devices. With 16 Gigabit PoE ports and 2 Gigabit SFP fiber ports, it provides a flexible networking solution for IP cameras, wireless access points, VoIP phones and other PoE-enabled equipment. The 230 W PoE power budget allows multiple connected devices to receive power directly through the network cables, helping simplify installations.
The Hikvision DS-3E1518P-SI-16P2F combines Gigabit Ethernet connectivity with smart network management and PoE support. Its metal housing provides a durable design for network installations, while the two SFP ports allow for Gigabit fiber uplinks where longer-distance or fiber-based connectivity is required.
Ports 1 to 16 support extended transmission distances of up to 300 metres when used with compatible equipment and suitable cabling. Each PoE port can deliver up to 30 W, with a total available PoE power budget of 230 W. This makes the switch well suited to surveillance networks and other installations where several powered network devices need to operate from a central switch.
The switch also includes network management functions such as VLAN tagging, loop prevention and storm control. Cable detection can assist with locating cable faults, while 6 kV surge protection helps provide additional protection for connected network equipment.
| ©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered. |
Specifications |
| Product Code | DS-3E1518P-SI-16P2F |
| General |
| Shell | Metal material |
| Net Weight | 2.56 kg (5.64 lb) |
| Gross Weight | 3.479 kg (7.67 lb) |
| Dimensions (W x H x D) | 440.0 mm x 44.0 mm x 220.8 mm (17.32'' x 1.73'' x 8.69'') |
| Operating Temperature | 0 degreesC to 45 degreesC (0 degreesF to 113 degreesF) |
| Storage Temperature | -40 degreesC to 85 degreesC (-40 degreesF to 185 degreesF) |
| Operating Humidity | 5% to 95% (no condensation) |
| Relative Humidity | 5% to 95% (no condensation) |
| Power Supply | 100 to 240 V AC, 50/60 Hz, Max. 4 A |
| Installation Mode | Rack (equipped with mounting ears) |
| Max. Power Consumption | 250 W |
| Power Consumption in Idle | 10 W |
| Surge Protection | 6 kV |
| Network Parameters |
| Ports | 16 x Gigabit PoE port,2 x Gigabit fiber optical port |
| MAC Address Table | 8 K |
| Switching Capacity | 56 Gbps |
| Packet Forwarding Rate | 41.66 Mpps |
| Internal Cache | 4.1 Mbits |
| Software Function |
| Long Range | Ports 1 to 16: up to 300 m. |
| Long range performance may vary depend on camera model or cable condition. |
| Port Isolation | Ports 1 to 18: port isolation mode to improve network security |
| Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
| PoE Watchdog | Ports 1 to 16: auto detect and restart the cameras that do not respond. |
| Link Aggregation | Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. |
| Support static link aggregation. |
| Support 8 aggregation groups. |
| QoS | QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. |
| Support port-based priority configuration. |
| Support SP, WRR priority schedule mode. |
| Loop Prevention | Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. |
| Support 802.1D STP. |
| Support 802.1w RSTP. |
| Support G.8032 ERPS. |
| VLAN | VLAN is used for network scale planning and network health improvement. |
| Support 802.1Q. |
| Configurable VLAN ID from 1-4094. |
| Support Trunk, Access port mode. |
| Support Max. 4094 VLAN. |
| HPP | Support one-click activation and remote management via Hik-Partner Pro. Functions supported: |
| 1. Display the port rate. |
| 2. Display the port bandwidth utilization rate. |
| 3. Display the PoE power usage. |
| 4. Display topology information. |
| 5. Display the alarm status. |
| 6. Restart ports and devices. |
| 7. Enable port long-rage mode. |
| 8. Remotely upgrade the device. |
| System Maintenance | Support device management via web. |
| Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. |
| Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. |
| Support management via Hik-Central Pro. |
| Support remote management via Hik-Partner Pro. |
| Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. |
| Support 802.1ab LLDP for peer device discovery. |
| Support SNMP v1/v2c for third-party management platform access. |
| Support port mirroring for fault locating. |
| Port Rate-Limiting | Port rate-limiting is used for port bandwidth adjustment to prevent network congestion. |
| Storm Control | Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. |
| Support port rate limiting based on broadcast, multicast, and unknown unicast packets. |
| DHCP Snooping | DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default. |
| ACL | Support ACL definitions based on source/destination MAC address, source/destination IP address, IP protocol type. |
| Support ACL application on ports. |
| Support IPv4 ACL and MAC ACL configurations. |
| Support inbound ACLs. |
| IPSG | IPSG can control the security of port access device. |
| Support port, MAC, IP binding. |
| Support 256 security entries. |
| PoE Power Supply |
| PoE Standard | IEEE 802.3af,IEEE 802.3at |
| PoE Power Pin | 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) |
| PoE Port | PoE: Ports 1 to 16 |
| Max. Port Power | 30 W |
| PoE Power Budget | 230 W |
| Approval |
| EMC | CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) |
| Safety | CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017) |
| Chemistry | CE-RoHS (201165EU) |
| WEEE (201219EU) |
| Reach (Regulation (EC) No.19072006) |
Up
Down
Mobile store
