Overview:MotionCam Outdoor Wireless outdoor motion detector with a photo camera to verify alarms
Lightning-fast alarms.Verified.MotionCam Outdoor recognizes intrusion from the very first steps on the territory and confirms it with an animated series of photos. Visual verification helps to instantly ascertain the situation, saving users from concerns, and security companies from unnecessary patrol dispatches.
Features:MotionCam Outdoor is also available with Photo on Demand feature. Such detectors take photos when they detect an intrusion, as well as at the users request in the Ajax app
Don't miss a thing Combining the best optics, fast processor and advanced software algorithms, MotionCam Outdoor takes informative pictures in any weather, day or night.
- HDR camera
- IR backlight
- Series of 2-5 photos
CMS software supporting visual alarms verification - Horus
- Manitou
- SBN
- Sentinel
- WBB
Intelligent false alarm filter MotionCam Outdoor is equipped with two independent PIR sensors, the signals of which are analyzed by a two-step LISA algorithm. When both sensors detect motion, LISA performs correlation and spectral analysis of the signals, which helps to instantly distinguish real threats from interferences.
Correlation analysis Whenever MotionС amOutdoor detects motion, LISA analyses and compares signal forms from two sensors in real-time. If forms are similar, the alarm is activated.
Multilevel anti-sabotage protection MotionCam Outdoor can not be unnoticeably disabled even if the system is disarmed. The detector is equipped with masking sensors that react to hindering, covering and painting the lens.
It will take the hub less than a minute to detect the loss of communication with the detector and inform a central monitoring station and users about the problem. The fact that MotionCam Outdoor was dismantled will become known instantly.
- Anti-masking system
- Notifications about detachment
- Configurable detector ping interval
Effective security in any weather MotionCam Outdoor resists the heat up to +60°С and withstand the cold down to −25°С . And to protect the sensors of the anti-masking system from rain and snow, we included a special hood.
- Efficiency in heat and cold
- IP55 enclosure protection
- Bundled hood to protect from rain and snow
Uncompromising communication reliability MotionCam Outdoor uses two secure radio protocols simultaneously: Jeweler and Wings. Radio protocols work independently of each other and each is focused on its own function. Jeweler transmits alarms in 0.15 seconds, and thanks to Wings, the first shot from the site will be in the app in less than 9 seconds .
The radio signal range is sufficient to install the detector where it will be most effective. And up to 3 years of battery life minimizes maintenance efforts.
- Two-way communication at a distance of up to1,700meters
- Photo delivery in less than9seconds
- Up to3years of battery life
Less manual labor. More settings in the app. The process of connecting and configuring MotionCam Outdoor saves installation engineers time in the best possible way. To add a detector to the system, all you have to do is scan the QR code with the Ajax app, assign a name and a room to it. Configure the device in the app in real time,test detection zones and communication. If necessary, the detector can be disabled or its system parameters can be reconfigured remotely, without visiting the site.
Specifications:
| ©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered. |
Specifications |
| Product Code | AJAX-MC-OUT-W |
| Classification | Electro-optical radio channel security detector |
| Type of detector | Wireless |
| Installation method | Outdoors / indoors |
| Recommended installation height | 0.8 - 1.3 m |
| Compatibility | Hub 2, Hub 2 Plus |
| Does not work with ReX radio signal range extender |
| Sensing element | 2 x PIR sensor |
| Motion detection distance | Adjustable, from 3 to 15 m |
| Pet immunity | Animals up to 80 cm tall |
| Sensitivity | Adjustable, 3 levels |
| Motion detector's viewing angle | Horizontal - 90° |
| Vertical - 80° |
| Camera's angle | Horizontal - 105° |
| Vertical - 50° |
| TV distortion (EBU standard) | Barrel, -17% |
| Photo in case of alarm | Photo resolution: |
| 320 x 176 pixels (by default) |
| 640 x 352 pixels |
| Shooting series up to 5 photos |
| Infrared light for shooting in the dark | Available |
| Power supply | 4 x CR123A batteries |
| Supply voltage | 6 V |
| Battery life | Up to 3 years (up to 2.5 years if "Delay when entering" setting is activated) |
| Calculate battery life |
| Jeweller radio technology | Communication range with a hub - up to 1,700 m in an open space |
| Two-way communication between hub and device |
| Radio frequency bands: |
| 866.0 - 866.5 MHz |
| 868.0 - 868.6 MHz |
| 868.7 - 869.2 MHz |
| 905.0 - 926.5 MHz |
| 915.85 - 926.5 MHz |
| 921.0 - 922.0 MHz |
| (depends on the region of sale) |
| Self-adjusting RF output power - up to 20 mW |
| Block encryption with a dynamic key |
| Detector polling period - 12-300 s |
| Frequency hopping |
| Alarm delivery time | 0.15 s |
| Wings radio technology | Transmission of a series of photos |
| Photo delivery time with a default settings: up to 9 seconds |
| Temperature sensor | Available |
| Operating temperature range | From -25°С to +60°С |
| Operating humidity | Up to 95% |
| Protection class | IP55 |
| Anti-sabotage | Anti-masking |
| Protection against forgery |
| Jamming detection |
| Tamper-resistant |
| Remote configuration and testing | Available |
| CMS compatibility | CMS connectivity: Contact ID, SIA (DC-09) |
| CMS software supporting visual alarms verification |
| Dimensions | 206 x 108 x 93 mm |
| Weight | 470 g |
| Complete set | MotionCam Outdoor motion detector |
| SmartBracket mounting panel |
| Hood visor |
| 4 x CR123A batteries (pre-installed) |
| Installation kit |
| User's guide |