About this product
The SUNIX IPC-E3204S is a 4-port PCI Express serial card that adds independent RS-232, RS-422 and RS-485 connectivity to a compatible PC, with communication speeds up to 921.6 Kbps, a SUNIX SUN2410 controller, 128-byte hardware FIFO and protection features including 15KV ESD and 1KV surge protection for RS-422/485 signals. Supplied with standard and low-profile bracket options, this industrial serial expansion card is well suited to automation, industrial control and legacy serial equipment applications. Buy the SUNIX IPC-E3204S online for a reliable multi-port serial communication solution.
Overview Summary
SUNIX IPC-E3204S 4-Port RS-232/422/485 PCI Express Serial Card provides four independent serial ports for adding high-speed RS-232, RS-422 and RS-485 communication to a compatible PCI Express system. Each port supports communication speeds from 50 bps up to 921.6 Kbps and uses a 128-byte hardware FIFO for reliable serial data handling.
The IPC-E3204S uses the SUNIX SUN2410 controller and supports automatic RS-422 and RS-485 detection and switching without requiring jumpers or software configuration for interface selection. Its protection features include 15KV ESD air discharge, 8KV ESD contact discharge and 1KV surge protection for RS-422/485 signals, making it suitable for demanding serial communication environments.
The card uses a PCI Express 2.0 x1 interface and includes a standard bracket with a low-profile bracket accessory for installation flexibility. It supports a wide range of operating systems including Windows, Linux and DOS, with additional UNIX support listed by the manufacturer.
Performance tier: Industrial high-speed multi-port serial expansion
Uses: Industrial automation, serial device connectivity, machine control, PLC communication, data acquisition, POS systems, legacy equipment integration
Overview
SUNIX IPC-E3204S, Industrial 4-port RS-232/422/485 PCI-Express Serial Card, allows users to expand four RS-232/422/485 ports on PC-based system. Each serial port achieves data rates up to 921.6 Kbps and utilizes UART with an on-chip 128-bytes hardware FIFO buffer for reliable, high-speed serial I/O. With SUNIX patented Auto-Switching RS-422/485 and RS-485 AHDC(TM) technology, user can easily manage different serial interfaces selection and RS-485 signal direction control. SUNIX IPC-E3204S board is provided with 2KV IEC6100-4-5 Level 3 Surge Suppressor and 15KV IEC61000-4-2 ESD Discharge Transceiver. Besides, board supports a wide variety of operating systems, including Windows, Linux, DOS, and UNIX. It is the best serial communicating solution for industrial and harsh environment applications.
Description
The SUNIX IPC-E3204S is an industrial 4-port PCI Express serial communication card designed to expand a compatible PC with four independent RS-232, RS-422 or RS-485 serial ports. It is intended for applications where multiple serial devices need to communicate with a single computer, including industrial automation, control systems, data acquisition and integration of serial equipment.
Each serial port supports data rates from 50 bps up to 921.6 Kbps. The card incorporates the SUNIX SUN2410 controller, which is 16C950 UART compatible, together with a 128-byte hardware FIFO. This hardware buffering helps support reliable high-speed serial input and output while reducing the risk of data loss during communication.
The IPC-E3204S supports RS-422 and RS-485 automatic detection and switching, allowing different supported serial interfaces to be selected without jumpers. SUNIX AHDC technology provides RS-485 signal direction control, while hardware auto flow control is designed to help maintain reliable data communication.
Protection is an important part of the card design. The serial signals have up to 15KV ESD protection for air discharge and 8KV ESD protection for contact discharge. RS-422 and RS-485 signals also have 1KV surge protection. The card uses a PCI Express 2.0 x1 interface and is supplied with standard and low-profile bracket options for flexible installation in compatible computer systems.
Features
The SUNIX IPC-E3204S combines multi-port serial connectivity, high communication speed and electrical protection in a PCI Express expansion card designed for industrial and general serial communication applications.
- 4 independent RS-232/RS-422/RS-485 serial ports
- Communication speeds from 50 bps up to 921.6 Kbps
- SUNIX SUN2410 controller with 16C950 UART compatibility
- 128-byte hardware FIFO per serial communication controller
- PCI Express 2.0 x1 interface
- Automatic RS-422 and RS-485 detection and switching
- AHDC technology for RS-485 signal direction control
- Hardware auto flow control
- 15KV ESD protection for air discharge
- 8KV ESD protection for contact discharge
- 1KV surge protection for RS-422/485 signals
- Plug and Play operation with I/O address and IRQ assigned by the system
- Standard 121 mm bracket included
- Low-profile 80 mm bracket supplied as an accessory
- Supports RS-232, RS-422, 4-wire RS-485 and 2-wire RS-485 communication
- Supports Windows, Linux and DOS, with additional UNIX operating system support
- Designed for industrial and serial communication applications
What's in the Box
- SUNIX IPC-E3204S PCI Express 4-port serial card
- Standard 121 mm bracket
- Low-profile 80 mm bracket accessory
- DB44 to 4-port DB9 male connection cable, 40 cm
Specifications
| © 2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered. |
Specifications and features |
| Product Code | AC-SiE3204S+L |
| Serial Communication |
| Interface | RS-232/422/485 |
| Controller | SUNIX SUN2410 |
| (16C950 UART Compatible) |
| BUS | PCI Express 2.0 x 1 (single lan) |
| No. of Port | 4-port |
| IRQ & IO | Assigned by System |
| Baud rate | 50bps ~921.6Kbps |
| Stop bit | 1, 1.5, 2 |
| Parity | even, odd, none, mark, space |
| Flow Control | Xon/Xoff (software) |
| FIFO | 128byte Hardware |
| Signal | RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI |
| RS-422: TxD+, TxD-, RxD+, RxD-, GND |
| 4-wire RS-485: TxD+, TxD-, RxD+, RxD-, GND |
| 2-wire RS-485: Data+, Data-, GND |
| Protection | ±15KV ESD IEC6000-4-2 Air Discharge |
| ±8KV ESD IEC61000-4-2 Contact Discharge |
| ±4KV ESD IEC61000-4-2 Level 2 Line-to-Line |
| 2KV Surge IEC61000-4-5 Level 3 Surge Immunity Test |
| PCB Connector | DB44 Female |
| Driver Support |
| Windows Client | XP/Vista/7/8/8.1 (X86/X64) |
| Windows Server | 2000 / 2003 / 2008 / 2008 R2 / 2012 / 2012 R2 (X86/X64) |
| Windows Embedded | Windows CE 4.2/5.0/6.0 |
| XP Embedded / POSReady 2009 / POSReady 7 / Embedded System |
| Linux | Linux 2.4.x/2.6.x/3.x |
| DOS | DOS |
| Regulatory Approvals |
| Hardware | EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, FCC Part 15 Class B, BSMI: CNS13438, C-Tick: CISPR22 AS/NZS, RoHS |
| Software | Microsoft WHQL Windows |
| Windows Client: XP/Vista/7/8/8.1 (X86/X64) |
| Windows Server: 2000/2003/2008/2008 R2/2012/2012 R2 (X86/X64) |
| Environment |
| Operation Temperature | 0 to 70degreesC (32 to 158degreesF) |
| Operation Humidity | 5 to 95% RH |
| Storage Temperature | -20 to 85degreesC (-4 to 185degreesF) |
| Dimension |
| PCB Dimension | 107x 68 mm |
| Bracket | Standard 121mm |
| Bracket Space | 1 |
FAQ
What is the SUNIX IPC-E3204S used for?
The SUNIX IPC-E3204S adds four serial communication ports to a compatible PCI Express computer for connecting RS-232, RS-422 and RS-485 equipment.
How many serial ports does the IPC-E3204S provide?
The card provides 4 independent serial ports.
What serial interfaces does the IPC-E3204S support?
It supports RS-232, RS-422, 2-wire RS-485 and 4-wire RS-485 communication.
What is the maximum communication speed?
The supported baud rate range is 50 bps to 921.6 Kbps.
Does the IPC-E3204S support PCI Express?
Yes. The card uses a PCI Express 2.0 x1 interface.
Does the IPC-E3204S provide surge protection?
Yes. It provides 1KV surge protection for RS-422/485 signals and also provides ESD protection for the serial signals.
What ESD protection does the IPC-E3204S provide?
The card provides +/-15KV IEC-61000-4-2 air discharge protection and +/-8KV IEC-61000-4-2 contact discharge protection, plus +/-4KV IEC-61000-4-2 Level 2 line-to-line protection.
Does the card support RS-485 automatic switching?
Yes. The IPC-E3204S supports automatic RS-422 and RS-485 detection and switching without requiring jumpers.
What controller does the IPC-E3204S use?
The card uses the SUNIX SUN2410 controller, which is 16C950 UART compatible.
Does the IPC-E3204S include a low-profile bracket?
Yes. The card has a standard 121 mm bracket and an 80 mm low-profile bracket accessory.
Which operating systems are supported?
The manufacturer lists support for Windows client and Windows Server versions, Linux, DOS and several UNIX operating systems. Current driver support should be checked against the operating system version before installation.
What connector is used on the PCIe card?
The card uses a DB44 female connector and includes a 40 cm DB44 to 4-port DB9 male connection cable.
Up
Down
Mobile store
