Hikvision DS-PM1-O1H-WE Wall Switch
The Hikvision DS-PM1-O1H-WE is a compact wireless wall switch designed for relay control and automation applications. It uses 868MHz two-way wireless communication with AES-128 encryption, providing wireless communication over a range of up to 1600m. The compact housing can be installed on a wall or inside an 86 box, making it suitable for discreet installation.
The Hikvision DS-PM1-O1H-WE Wall Switch provides convenient wireless relay control with support for automation scenarios based on alarms, manual operation, faults and schedules. The device can be operated through the app, keyfob or keypad, while its LED indicators provide clear status information for registration, signal, power and relay operation. Its compact 38 x 25 x 18mm housing allows it to fit into discreet installation locations.
The DS-PM1-O1H-WE supports a single relay output with NO/NC configuration and is rated for AC 100-240V at up to 13A. Two-way 868MHz wireless communication and AES-128 encryption provide secure communication, while the 1600m wireless transmission distance supports flexible installation.
Key Details
Wireless Control and Automation
The wall switch supports two-way 868MHz communication using 2GFSK modulation. It can be integrated into automation scenarios and configured to respond to different events, including alarms, operations, faults and schedules.
The relay can also be controlled through the app, keyfob or keypad, allowing one-button switching for connected equipment.
Status Monitoring
Three LED indicators provide information about the device. The LEDs indicate registration and signal status, power status and relay status, making it easier to monitor the wall switch during operation.
Relay Output
The DS-PM1-O1H-WE includes one relay output with NO/NC configuration and supports AC 100-240V loads up to a maximum of 13A.
Installation and Design
With a compact plastic housing measuring 38 x 25 x 18mm and weighing 31.5g, the Hikvision wall switch is designed for discreet installation. It can be mounted directly on a wall or installed inside an 86 box.
Technical Details
| ©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered. | |
Specifications![]() | |
| Product Code | HK-302401745![]() |
| Software features | |
| Scenario setting | By Alarm, By Operation, By Fault, By Schedule, By Manual |
| Learning button | 1, For register |
| Hardware features | |
| Serial port | 1, for debug |
| Display | |
| LEDs status | 3, Register/Signal (Green/Red), Power (Green), Relay Status (Blue) |
| Electrical characteristics | |
| Power supply | AC 100v - 240v, 50/60 HZ |
| Operation humidity | 10%~90% |
| Operation temperature | &#-413;10degreesC~+55degreesC |
| Wireless transmission | |
| RF frequency | 868MHz |
| RF method | Two way communication |
| RF modulation | 2GFSK |
| RF distance | 1600m |
| Wireless security | AES-128 |
| General | |
| Installation method | Wall Mounting or Inside 86 box |
| Dimension(WxHxD) | 38x25x18mm |
| Shell material | Plastic |
| Color | White |
| 31.5g | |
| Device management | |
| Relay output | 1, NO/NC (AC 100~240v, Max 13A) |
Sold by ComX Computers