ZXV10-W812N-V2 specification sheet

Overview:

The W812N V2 is a dual-band indoor AP with 2.4G for coverage and 5G for coverage or wireless bridge. This high-performance 802.11n AP features 2 spatial steams, delivers wireless data rates up to 300 Mbps and can be flexibly mounted on wall or ceiling. Developed under the unified ZTE CSP software platform, it can easily switch and operate as Coordinated or Stand-alone AP, and provide stable and manageable carrier-grade WLAN.

Features:

• 2.4G/5G Dual Bands
• 100 mW High Power (2.4G)
• 2X2 MIMO 2 Spatial Streams
• 802.11a/b/g/n up to 300Mbps
• 10/100/1000Mbps Ethernet
• PoE or AC Adaptor Power Supply
• IP31 Environmental Protection
• Coordinated / Stand-alone AP mode software switchable

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	ZXV10-W812N-V2
Standard	IEEE 802.11a/b/g/n
	802.11b: BPSK, QPSK, CCK
	802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
PHY Data Rate	802.11b: 1,2,5.5, 11Mbps (DSSS)
	802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54Mbps (OFDM)
	802.11n: MCS0 to MCS15 up to 300Mbps
Radio Chains	2X2 MIMO 2 Spatial Streams
	MRC for improved receiver performance
	Cyclic delay diversity for improved downlink RF performance
	STBC for increased range and reception
Frequency Band	2.4-2.484GHz
	5.15-5.85GHz
	Dual-radio, dual-band 802.11n indoor
Channelization	HT 20MHz / 40MHz
RF Transmit Power	2.4G Hz: Max. 100 mW (limited by local regulatory requirements)
	5G Hz: Max. 100 mW (limited by local regulatory requirements
	4 external omni-directional antennas
Encryption	64/128-bit WEP
	WPA-PSK, WPA2-PSK
	WPA-Enterprise, WPA2-Enterprise
	TKIP and AES/CCMP
RF Interface	4 * external SMA-type connectors
Network Interface	1 * RJ-45 for Gigabit Ethernet
	Auto-MDIX and POE
Other Interface	1* DC power connector
Environmental Condition	Indoor IP31
	Work Temperature -10°C to 55°C
	Humidity 5 to 95% non-condensing
Power Rating	10.0 W (typical)
Power Supply	PoE 802.3af/at
	12V DC external AC adapter
Dimensions	180 (D) x 165 (W) x 50 (H) mm
Weight	0.8 kg