UB-USW-PRO-MAX-24-POE specification sheet

• A 24-port, Layer 3 Etherlighting switch with 2.5 GbE and PoE++ output.
• Etherlighting ports that illuminate to indicate port location, speed/link, and native VLAN/network*
• (8) 2.5 GbE PoE++ ports
• (16) GbE ports including (8) PoE+ and (8) PoE++
• (2) 10G SFP+ ports
• DC power backup ready
• 400W total PoE availability
• Managed with UniFi Network 8.0.24 and later

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	UB-USW-PRO-MAX-24-POE
Mechanical
Dimensions	442 x 325 x 44 mm (17.4 x 12.8 x 1.7")
Weight	Without mounting brackets: 5.1 kg (11.3 lb)
	With mounting brackets: 5.2 kg (11.5 lb)
Enclosure material	SGCC steel
Hardware
Management interface	Ethernet In-Band
Networking interface	(16) GbE RJ45 ports
	(8) 1/2.5 GbE RJ45 ports
	(2) 10G SFP+ ports
PoE interface	(8) PoE/PoE+ (Pins 1, 2+, 3, 6-)
	(16) 60W PoE++ (Pair A 1, 2+, 3, 6-) (Pair B 4, 5+, 7, 8-)
Total non-blocking throughput	56 Gbps
Switching capacity	112 Gbps
Power method	(1) Universal input, 100-240V AC, 50/60 Hz
	(1) USP-RPS DC input
Power supply	AC/DC, internal, 450W
Supported voltage range	100-240V AC
Max. power consumption	50W (Excluding PoE output)
Total available PoE	400W
Max. PoE wattage per port by PSE	PoE: 15.4W
	PoE+: 30W
	PoE++: 60W
Voltage range PoE mode	PoE: 44-57V
	PoE+: 50-57V
LCM display	(1) 1.3" touchscreen
Button	Factory reset
Operating temperature	-5 to 40° C (23 to 104° F)
Operating humidity	10 to 90% noncondensing
Certifications	CE, FCC, IC
Etherlighting
Ethernet	Locating
	Speed/link
	Native VLAN/network
SFP+	Locating
	Speed/link
	Native VLAN/network
LEDs
System	Status
RPS	Status
Application Requirements
UniFi Network	Version 8.0.24 and later