UB-NS4 specification sheet

In Stock Buy now!

Overview:

NanoSwitch N-SW
The NanoSwitch is an outdoor, 4-port Gigabit switch with PoE pass-through. It is powered by 24V Passive PoE and provides up to 24W of power on three PoE out ports. The NanoSwitch is designed for outdoor deployment and supports up to 4 Gbps total, non-blocking line rate.

*PoE Injector Not Included

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	UB-NS4
N-SW
Dimensions	196.4*93.5*32.4mm
	7.73*3.68*1.28inch
Weight	269g
	9.5oz
Enclosure Characteristics	White Polycarbonate
HARDWARE
Processor	RTL8367N-VB
On-Board Flash Storage	4Kbits
Total Non-Blocking Line Rate	4Gbps
TYP. Power Consumption	1.5W
Power Method	Passive 24V PoE-in
Supported Voltage Range	Passive 24V PoE-in
Networking Interfaces	(4) 10/100/1000 Mbps Ethernet RJ45
PoE Interfaces	Passive 24V PoE-in
Max PoE+ Wattage per Port by PSE	24V@1A per port / Total 24V@1.5A for three ports
Passive PoE Max wattage per port	24W per port / Total 36W for three ports
Operating Temperature	-30C ~ 70C
Operating Humidity	5 to 95% Non-Condensing