UA-G3SK-PRO specification sheet

Specifications for UA-G3SK-PRO

Ubiquiti UniFi Access G3 starter kit Pro with Hub & 2x readers

UA-G3SK-PRO Gallery image 1 [Size: 1200 (W) x 1200 (H)]

UA-G3SK-PRO Gallery image 2 [Size: 1223 (W) x 1010 (H)]

UA-G3SK-PRO Gallery image 3 [Size: 1359 (W) x 1019 (H)]

UA-G3SK-PRO Gallery image 4 [Size: 1304 (W) x 978 (H)]

Ubiquiti UniFi Access G3 starter kit Pro with Hub & 2x readers, UA-G3-SK-Pro, 1x Door Hub, 1x G3 reader Pro, 1x G3 reader, 2x Pocket Keyfobs

Intercoms / access control

Ubiquiti

In Stock Buy now!

R 11 720.00 inc VAT

Overview:

G3 Starter Kit Pro
UA-G3-SK-Pro

Starter kit that provides complete entry and exit control for a single door with two readers and Touch Pass support.

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	UA-G3SK-PRO
Overview
In the Box	(1) Door Hub
	(1) G3 Reader Pro
	(1) G3 Reader
	(2) Pocket Keyfobs
Touch Pass	10 free 1-year Touch Passes included
Door Hub
Dimensions	174.9 x 126 x 32.9 mm
Dimensions	(6.9 x 5 x 1.3")
Supported Doors	1
Input Terminals	(2) Door exit request
	(1) Door position
	(1) Emergency
Power Method	PoE++
	UL 294 Power-limited Class 2 PSU
	UL 60950-1/62368-1 LPS/PS2 PSU
UL 294 Level	Destructive attack: Level I
	Line security: Level I
	Endurance: Level I
	Standby power: Level I
Weight	363 g (12.8 oz)
Enclosure Material	Polycarbonate
Mount Material	Polycarbonate
Mounting	DIN-rail (Included)
Ambient Operating Temperature	0 to 40° C (32 to 104° F)
Ambient Operating Humidity	5 to 95% noncondensing
Networking Interface	(5) 10/100/1000 Base-T
PoE Interface	(1) PoE++ input, 50V DC, 1A
PoE Interface	(4) PoE outputs, 50V DC, 15.4W per port (Max. 28W aggregated)
Max. Power Consumption	30W (Without PoE output)
Max. Power Consumption	50W (With PoE output)
Digital Input	Request to exit, request to enter, remote release, door position sensor
Dry Output Relay	Lock: 30V DC, 1A
Dry Output Relay	Aux: 30V DC, 1A
Powered Output Relay	Lock: 12V DC, 1A
	Aux: 12V DC, 0.33A
	12V DC, 0.33A
LEDs	B/W Learn More
Button	(1) Factory-reset
Recommend Max. Cable Length	UA-Lock-Electric
	(400mA)
	24 AWG length: 25 m (82 ft)
	22 AWG length: 42 m (138 ft)
	20 AWG length: 66 m (217 ft)
	18 UACC-Cable-DoorLockRelay length: 100 m (328 ft)
	UA-Lock-Magnetic-540kg (500mA)
	24 AWG length: 20 m (66 ft)
	22 AWG length: 32 m (105 ft)
	20 AWG length: 51 m (167 ft)
	18 UACC-Cable-DoorLockRelay length: 80 m (262 ft)
	UA-Lock-Magnetic-270kg (800mA)
	24 AWG length: 12 m (29 ft)
	22 AWG length: 20 m (98 ft)
	20 AWG length: 30 m (167 ft)
	18 UACC-Cable-DoorLockRelay length: 46 m (151 ft)
	Other locks
	(1A)
	24 AWG length: 9 m (30 ft)
	22 AWG length: 15 m (49 ft)
	20 AWG length: 24 m (79 ft)
	18 UACC-Cable-DoorLockRelay length: 36 m (118 ft)
PoE Cabling Requirements	Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
PoE Cabling Requirements	The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords , 24 AWG (0.21 mm² ) for horizontal or riser cable.
UL 294 Statement	Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294.
UL 294 Statement	The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
CAN/ULC-60839-11-1 Grade	Grade assignment: 1
Certifications	CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level	UA-Hub-Door002, V01
G3 Reader Pro
Dimensions	160 x 40.4 x 40.55 mm
Dimensions	(6.3 x 1.59 x 1.6")
Integrated Camera	✓
NFC Card & Keyfob Access	✓
PIN Access	✓
Apple/Google Wallet	✓
Mobile Unlock	✓
Two-Way Intercom & Doorbell Access	✓
Weatherproofing	IP55
NDAA Compliant	✓
UL 294 Level	Destructive attack: Level I
	Line security: Level I
	Endurance: Level I
	Standby power: Level I
Weight	136 g (4.8 oz)
Enclosure Material	Polycarbonate, glass
Mount Material	Aluminum alloy
Mounting	Wall, gang-box mount (Included)
Mounting	Angle mount, junction box (Optional)
Indoor and Outdoor Use	✓
Ambient Operating Temperature	Device: -30 to 45° C (-22 to 113° F)
Ambient Operating Temperature	Display: -10 to 45° C (14 to 113° F)
Ambient Operating Humidity	5 to 90% noncondensing
Networking Interface	(1) GbE RJ45 port
Connectivity	BLE 4.2
Connectivity	NFC
Power Method	PoE
	UL 294 Power-limited Class 2 PSU
	UL 60950-1/62368-1 LPS/PS2 PSU
Max. Power Consumption	6W
Supported Voltage Range	48V DC
ESD/EMP Protection	Air: ±15kV, contact: ±8kV
Sensors	Proximity sensor
Display	120 mm (4.7") diagonal
Touch Screen Technology	Capacitive touch
Display Luminance	480 nits (Typical)
Screen Orientation	Portrait
Resolution	1280 x 286 px
Microphone	✓
Speaker	(1) Yes, 1.5W
LEDs	R/G/B/W/Amber Learn More
Button	(1) Factory-reset
NFC Frequency	13.56 MHz
NFC Read Range	< 30 mm (1.18'')
NFC Technology	ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340)
	MIFARE Classic / MIFARE DESFIRE
	Sony FeliCa (ID only)
	NFC Forum tags T1T, T2T, T3T, T4T and T5T
	ECP 2.0
PoE Cabling Requirements	Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
PoE Cabling Requirements	The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords , 24 AWG (0.21 mm² ) for horizontal or riser cable.
UL 294 Statement	Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
UL 294 Statement	The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
CAN/ULC-60839-11-1 Grade	Grade assignment: I
Certifications	CE, FCC, IC,UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level	UA-G3-Pro-W/UA-G3-Pro-B, V01
G3 Reader
Dimensions	93 x 40 x 36.5 mm
Dimensions	(3.7 x 1.6 x 1.4")
NFC Card & Keyfob Access	✓
Apple/Google Wallet	✓
Mobile Unlock	✓
Handwave Request to Exit	✓
Weatherproofing	IP55
NDAA Compliant	✓
UL 294 Level	Destructive attack: Level I
	Line security: Level I
	Endurance: Level I
	Standby power: Level I
Weight	82 g (2.9 oz)
Enclosure Material	Polycarbonate, glass
Mount Material	Aluminum alloy
Mounting	In-wall, gang box (Included)
Mounting	Junction box (Optional)
Indoor and Outdoor Use	✓
Ambient Operating Temperature	-30 to 45° C (-22 to 113° F)
Ambient Operating Humidity	5 to 90% noncondensing
Networking Interface	(1) 10/100 MbE RJ45 port
Connectivity	BLE 4.1
Connectivity	NFC
Power Method	PoE
	UL 294 Power-limited Class 2 PSU
	UL 60950-1/62368-1 LPS/PS2 PSU
Max. Power Consumption	5W
Supported Voltage Range	48V DC
ESD/EMP Protection	Air: ±15kV, contact: ±8kV
Sensors	Proximity sensor
Speaker	(1) Yes, 0.7W
LEDs	R/G/B/W Learn More
Button	(1) Factory-reset
NFC Frequency	13.56 MHz
NFC Read Range	< 30 mm (1.18'')
NFC Technology	ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340)
	MIFARE Classic / MIFARE DESFIRE
	Sony FeliCa (ID only)
	NFC Forum tags T1T, T2T, T3T, T4T and T5T
	ECP 2.0
PoE Cabling Requirements	Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
PoE Cabling Requirements	The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords , 24 AWG (0.21 mm² ) for horizontal or riser cable.
UL 294 Statement	Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
UL 294 Statement	The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
CAN/ULC-60839-11-1 Grade	Grade assignment: I
Certifications	CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level	UA-G3, V01
Pocket Keyfob
Dimensions	84 x 39 x 7.4 mm
Dimensions	(3.3 x 1.5 x 0.29")
Weight	16 g (0.56 oz)
Enclosure Material	Polycarbonate, stainless steel, silicone rubber
Weatherproofing	IP54
NDAA Compliant	✓
Ambient Operating Humidity	10 to 90% noncondensing
Ambient Operating Temperature	-10 to 45° C (14 to 113° F)
NFC Frequency	13.56 MHz
NFC Technology	ISO/IEC 14443 Type A
	MIFARE DESFire EV3 4K
	UniFi Access Proprietary Security Protocol
Certification	CE

View this product now

View our entire product range

Sold by ComX Computers

Facebook Specification sheets Brands Browse products Current specials

Specifications are subject to change without notice. E&OE. Prices are a guide only, and are valid on 2026-10-07 only, subject to stock being available. The specifications displayed above apply to the entire range and may not apply to this specific model. Kindly note that options cannot be changed for most models, and some options are not available in South Africa.