NET-TL-WPA4220KIT specification sheet

Features:

Wi-Fi Auto-Sync for Unified Wi-Fi Network
Wi-Fi Auto-Sync creates a simple, intuitive powerline experience. Pressing the Wi-Fi Clone button instantly copies your network name and password from your router for easy setup. Wi-Fi Move automatically applies any settings changes across the network. Your existing Wi-Fi settings will be synchronized to the new extender automatically.

Extend Your Powerline Network to Any Room
Based on the Powerline technology, your network extension is never limited to the primary coverage of your router. With advanced HomePlug AV, TL-WPA4220 KIT is perfect for delivering ultra-fast data transfer speed and brings network to anywhere there is a power outlet.

Plug, Pair and Play!
Plug the TL-PA4010 in the wall and connect it to the router with an Ethernet cable.Then plug the TL-WPA4220 in any desired power outlet. Press the ‘Pair’ buttons on both adapters to create a secure network. There you go! Just enjoy the seamless, high speed wired and wireless network.

Powerline Management on Your Smartphone
The tpPLC Utility and tpPLC app make it easy to control wireless network settings, set schedules for Wi-Fi availability and even control the LED indicators on your adapters from any iOS or Android device. You can download the tpPLC app for iOS and Android devices.

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	NET-TL-WPA4220KIT
HARDWARE FEATURES
Plug Type	AU
Standards and Protocols	HomePlug AV, IEEE802.3, IEEE802.3u, IEEE802.11b/g/n
Interface	2*10/100Mbps Ethernet Port
Button	Pair, Reset, Wi-Fi/Wi-Fi Clone
Power Consumption	Maximum: 7.608W (220V/50Hz)
	Typical: 7.216W (220V/50Hz)
	Standby: 4.610W (220V/50Hz)
LED Indicator	PWR, PLC, ETH, Wi-Fi/Wi-Fi Clone
Dimensions ( W x D x H )	3.7 x 2.1 x 1.6 in. (94x54x40mm)
Range	300 Meters over electrical circuit
WIRELESS FEATURES
Frequency	2.4-2.4835GHz
Signal Rate	11n: Up to 300Mbps(dynamic)
	11g: Up to 54Mbps(dynamic)
	11b: Up to 11Mbps(dynamic)
Reception Sensitivity	270M: -68dBm@10% PER
	130M: -68dBm@10% PER
	108M: -68dBm@10% PER
	54M: -68dBm@10% PER
	11M: -85dBm@8% PER
	6M: -88dBm@10% PER
	1M: -90dBm@8% PER
Wireless Security	64/128-bit WEP / WPA / WPA2, WPA-PSK / WPA2-PSK
Advanced Functions	Enable/DisableWireless Radio, WMM, Wireless Statistics
Transmission Power	CE:<20dBm(2.4GHz)
	FCC:<30dBm
SOFTWARE FEATURES
Modulation Technology	OFDM (PLC)
Encryption	Powerline Security:
	128-bit AES
	Wireless Security:
	WEP, WPA/WPA2, WPA-PSK/WPA2-PSK Encryption
OTHERS
Certification	CE, FCC, RoHS
Package Contents	Powerline Ethernet Adapter 1x TL-WPA4220 + 1x TL-PA411
	6.5 ft. (2 m) Ethernet cable (RJ45)
	Resource CD
	Quick Installation Guide
System Requirements	Windows 2000/XP/2003/Vista, Windows 7/8, Mac, Linux
Environment	Operating Temperature: 0°C~40°C (32°F ~104°F)
	Storage Temperature: -40°C~70°C (-40°F ~158°F)
	Operating Humidity: 10%~90% non-condensing
	Storage Humidity: 5%~90% non-condensing