LUM-IiCR48V-4000 specification sheet
Specifications for LUM-IiCR48V-4000
Luminous - Icruze Inverter 4000VA 48V
![LUM-IiCR48V-4000 Gallery image 1 [Size: 1148 (W) x 1148 (H)]](i/luminous/th200/th200_251332_IMG1.jpg)
Luminous - Icruze Inverter 4000VA 48V, IiCR48V-4000, Pure Sinewave, Non-Solar, Requires 4x 12V Battery, Batteries not included, Max load of 2850W and a charging current of 21A
Inverters
Inverters
Luminous
In Stock Buy now!
R 7 470.00 inc VAT
Overview:
Luminous - iCruze Inverter, 4000VA, 48V
The Luminous iCruze 4000VA, 48V inverter offers a max load of 2850W and a charging current of 21A. When purchasing this unit, 4 x 12V Inverlast Tall Tubular batteries, either 150Ah, 200Ah or 220Ah are required for operation. All four batteries must have the same Ah rating and be connected in series. This is not a DIY unit as it has to be connected to your Grid.
Luminous - iCruze Inverter, 4000VA, 48V
The Luminous iCruze 4000VA, 48V inverter offers a max load of 2850W and a charging current of 21A. When purchasing this unit, 4 x 12V Inverlast Tall Tubular batteries, either 150Ah, 200Ah or 220Ah are required for operation. All four batteries must have the same Ah rating and be connected in series. This is not a DIY unit as it has to be connected to your Grid.
Specifications:
| ©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered. | |
Specifications | |
| Product Code | LUM-IiCR48V-4000 |
| Model | 4KVA |
| Input Regulated UPS mode | |
| Rated Voltage | 230V AC |
| Undervoltage | 180±5V |
| Undervoltage Restoration | 190±5V |
| Overvoltage | 260±5V |
| Overvoltage Restoration | 250±5V |
| Input Unregulated ECO mode | |
| Undervoltage | 140±5V |
| Undervoltage Restoration | 150±5V |
| Overvoltage | 280±5V |
| Overvoltage Restoration | 270±5V |
| Output | |
| Rated voltage (UPS Mode) | 230V AC |
| Voltage (Mains Mode) | SAME AS INPUT |
| Frequency (UPS Mode) | 50±1Hz |
| Frequency (Mains Mode) | SAME AS INPUT (47-53 Hz) |
| Load Performance Factor | 0.6 to 0.8# |
| Overload | > 110% |
| Transfer Time(typical a.s.) | < 10 ms. |
| Battery | |
| Capacity | 60Ah-220Ah TUBULAR / FLAT / SMF |
| Number of Battery | 4 |
| Typical Recharge Time | 8-10 hours approx |
| Battery Boost Volatge | 55V-57V |
| Protection | LOW BATTERY |
| TDR | |
| TDR Delay | 4Min approx |
| Physical | |
| Net weight (Kg.) | 36.0 Kg |
| Gross weight (Kg.) | 38.0 Kg |
| Dimension (LxWxH)(mm) | 300x487x 452 |
| Front LCD Displays | |
| Load Percentage | Displays "L085%" |
| Time to Charge & Discharge | Display time to charge or discharge in HH:MM |
| Overload | Displays "old" |
| Short Circuit | Displays "sct" |
| AC MCB Trip | Displays "AC:bt" |
| Front LCD Displays | |
| DC MCB Trip | Displays "DC:bt" |
| No Load | Displays "nL:dl" |
| Overtemperature | Displays "otp" |
| Battery Low | Displays "Lbt" when batt. completely discharged |
| Battery High Cut | Displays "btHI" When Batt.Voltage Batt.Voltage > 63V |
| Temp. Sensor Failed | Displays "tSFL" When internal failure |
| Battery Level Symbol | Displays battery level available |
| Charging Symbol | Displays when battery is charging |
| Mains Symbol | Displays spark symbol |
| Mode Selection | Displays ECO or UPS Mode |
| Fault Symbol | Displays if there any fault or trip condition |
| Alarms | |
| UPS ON/OFF Low Battery | 5 Beeps of 1Sec. each 1 Beep of 10Sec. |
| Battery High Cut | 1 Beep of 10Sec. |
| NO Load shutdown | 1 Beep of 10Sec. |
| Short Circuit Overload shutdown | 1 Beep of 10Sec. 1 Beep of 10Sec. |
| Low Battery Warning | 10 Beeps of 1Sec. each |
| Mains MCB Trip | 1 Beep of 10Sec. |
| Over Temperature | 1 Beep of 10Sec. |
| Battery MCB Trip | 1 Beep of 10Sec. |
| Temp. Sensor Failed | 1 Beep of 10Sec. |
| Environ mental | |
| Operating Temperature | 0-45°C (32-113°F) |
| Storage Temperature | 0-45°C (32-113°F) |
| Humidity | 0-95% RH non-condensing |
Sold by ComX Computers
Specifications are subject to change without notice. E&OE. Prices are a guide only, and are valid on 2026-10-27 only, subject to stock being available.
The specifications displayed above apply to the entire range and may not apply to this specific model. Kindly note that options cannot be changed for most models, and some options are not available in South Africa.