HK-301803154 specification sheet

Overview:

Hikvision 8 Port Fast Ethernet Smart PoE Switch DS-3E1309P-EI (B)
The Hikvision DS-3E1309P-EI (B) is an 8 port Fast Ethernet Smart PoE switch designed for reliable network connectivity and power delivery for IP cameras and other compatible PoE devices. With eight 10/100 Mbps PoE ports, a Gigabit RJ45 uplink port and a total PoE power budget of 110 W, it is well suited to small and medium surveillance network installations.

The fan-free metal design helps provide quiet operation while allowing the switch to be installed on a desk or mounted on a wall. Long-range PoE transmission of up to 300 metres can also make it easier to connect compatible cameras where standard Ethernet distances are not sufficient.

Description:

The Hikvision DS-3E1309P-EI (B) combines network switching, PoE power delivery and smart network management functions in a compact design. Its eight PoE ports can provide up to 30 W per port, while the 110 W total PoE budget supports multiple connected devices. PoE watchdog technology can automatically detect and restart cameras that stop responding, helping maintain reliable surveillance operation.

The switch also supports VLAN configuration, STP/RSTP loop prevention and cable detection for locating network faults. With 6 kV surge protection and long-range PoE transmission, it is designed for dependable use in CCTV and IP networking environments.

Features:

Reliable PoE Connectivity for CCTV
Eight Fast Ethernet PoE ports provide both network connectivity and power to compatible devices through a single Ethernet cable. This helps simplify CCTV installations by reducing the need for separate power connections at each camera location.

Key networking capabilities include:

• 8 x 10/100 Mbps PoE ports
• 1 x Gigabit RJ45 port
• Up to 30 W maximum PoE power per port
• 110 W total PoE power budget
• PoE transmission up to 300 metres on Ports 1 to 8
• Support for 802.1Q VLAN

Smart Management for IP Cameras
The PoE watchdog function monitors connected cameras and can detect devices that stop responding before automatically restarting them. This can help reduce the need for manual intervention and improve the reliability of a surveillance network.

STP/RSTP support provides loop prevention, while cable detection helps identify and locate network cable faults during installation or troubleshooting.

Quiet, Flexible Installation
A fan-free design allows the DS-3E1309P-EI (B) to operate without the noise associated with a cooling fan. Its metal construction provides a practical enclosure for network and CCTV installations, with support for both desk-mounted and wall-mounted placement.

Protection and Long Range Transmission
For installations that require cameras to be positioned well away from the main network equipment, the switch supports long-range PoE transmission of up to 300 metres on Ports 1 to 8. Built-in 6 kV surge protection provides additional protection for the switch and connected network equipment.

Technical Details

• Model: DS-3E1309P-EI (B)
• Part Number / SKU: HK-301803154
• Port configuration: 8 x 10/100 Mbps PoE + 1 x Gigabit RJ45
• PoE ports: Ports 1 to 8
• Maximum PoE power per port: 30 W
• Total PoE power budget: 110 W
• PoE transmission distance: Up to 300 m
• VLAN: 802.1Q VLAN support
• Loop prevention: STP/RSTP
• Cable fault detection: Supported
• PoE watchdog: Supported
• Surge protection: 6 kV
• Cooling: Fan-free design
• Installation: Desk-mounted or wall-mounted
• Housing: Metal

The Hikvision DS-3E1309P-EI (B) is a practical choice for CCTV installers and network users looking for an 8 port PoE switch with long-range transmission, smart monitoring functions and reliable network protection in a quiet, compact design.

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	HK-301803154
General
Shell	Metal material, fan-free design
Net Weight	0.35 kg (0.77 lb)
Gross Weight	1.114 kg (2.45 lb)
Dimensions (W x H x D)	170.00 mm x 27.60 mm x 93.10 mm (6.69'' x 1.09'' x 3.67'')
Operating Temperature	0 degreesC to 40 degreesC (32 degreesF to 104 degreesF)
Storage Temperature	-40 degreesC to 85 degreesC (-40 degreesF to 185 degreesF)
Operating Humidity	5% to 95% (no condensation)
Relative Humidity	5% to 95% (no condensation)
Power Supply	54VDC , 2.22A
Installation Mode	Desk-Mounted,Wall-Mounted
Max. Power Consumption	120 W
Power Consumption in Idle	10 W
Surge Protection	6 kV
Network Parameters
Ports	8 x 10/100 Mbps PoE port,1 x Gigabit RJ45 port
MAC Address Table	8 K
Packet Forwarding Rate	Whole-Device Performance: 4.17 Mpps
	Port Performance: 2.68 Mpps
Internal Cache	4 Mbits
Switching Capacity	Whole-Device Performance: 5.6 Gbps
	Port Performance: 3.6 Gbps
Software Function
Long Range	Ports 1 to 8: up to 300 m.
	Long range performance may vary depend on camera model or cable condition.
Port Isolation	Ports 1 to 8: port isolation mode to improve network security
	Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE Watchdog	Ports 1 to 8: auto detect and restart the cameras that do not respond.
Loop Prevention	Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.
	Support 802.1D STP.
	Support 802.1w RSTP.
VLAN	VLAN is used for network scale planning and network health improvement.
	Support 802.1Q.
	Configurable VLAN ID from 1-4094.
	Support Trunk, Access port mode.
	Support Max. 4094 VLAN.
HPP	Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
	1. Display the port rate.
	2. Display the port bandwidth utilization rate.
	3. Display the PoE power usage.
	4. Display topology information.
	5. Display the alarm status.
	6. Restart ports and devices.
	7. Enable port long-rage mode.
	8. Remotely upgrade the device.
System Maintenance	Support device management via web.
	Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.
	Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
	Support management via Hik-Central Pro.
	Support remote management via Hik-Partner Pro.
	Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.
	Support 802.1ab LLDP for peer device discovery.
	Support port mirroring for fault locating.
PoE Power Supply
PoE Standard	IEEE 802.3af,IEEE 802.3at
PoE Power Pin	8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE Port	PoE: Ports 1 to 8
Max. Port Power	30 W
PoE Power Budget	110 W
Approval
EMC	CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
Safety	CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
Chemistry	CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)