DS-K1109DKFB-QR specification sheet

• Supports RS-485 and Wiegand (W26, W34 ) protocol
• Supports reading DESfire card, Felica card and M1 card
• Supports authentication via card, password, fingerprint and QR code
• Supports bluetooth module (when connecting by RS-485)
• Tamper-proof function
• Max. 5000 fingerprint capacity

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	DS-K1109DKFB-QR
Interface
TAMPER	1
RS-485	1
Wiegand	1
Capacity
Fingerprint Capacity	5000
Authentication
Card Type	M1 card, DESfire card, Felica card
General
Power Supply	12 VDC
Power Consumption	With load: ≤ 14 w
	Without load: ≤ 4 w
Working Temperature	-40 °C to 65 °C (-40 °F to 149 °F)
Working Humidity	0 to 90% (no condensing)
Protective Level	IP65
Dimensions	125 mm x 84.5 mm x 18 mm (4.92" x 3.33" x 0.71")
Installation	Wall mounting
Weight	≤ 1 kg (2.20 lb)
Buzzer	Support
Function
Barcode Recognition	Support
	Format: Code 128, Interleaved 2 of 5, Matrix 2 of 5, Code 39, Codebar, Code 9 and UCC/EAN-128
QR Code Recognition	Support (when connecting by RS-485)