AHPLSP-10 specification sheet

Overview:

Anycubic PLA Basic Filament 1kg Pink 1.75mm for FDM 3D Printers
The Anycubic PLA Basic Filament 1kg in Pink is a dependable choice for makers, hobbyists, educators, and professionals looking for consistent, high-quality 3D printing results. Designed for FDM 3D printers that support 1.75mm filament, it delivers smooth, bubble-free extrusion with a precise diameter tolerance of 1.75mm plus or minus 0.02mm. The vibrant pink finish adds eye-catching colour to models, prototypes, toys, decorations, and creative projects while the neatly wound spool helps ensure reliable, tangle-free feeding throughout long print jobs.

Description:

Create colourful, detailed 3D prints with Anycubic PLA Basic Filament 1kg Pink. Manufactured from eco-friendly plant-based PLA, this easy-to-print material offers low odour, excellent dimensional accuracy, and reliable layer adhesion. Its carefully wound spool reduces feeding issues, while compatibility with a wide range of FDM 3D printers makes it an ideal choice for everyday printing. For optimal print quality, drying the filament before use is recommended.

Features:

Why Choose Anycubic PLA Basic Filament
Whether you are printing functional prototypes, educational models, artistic creations, or decorative items, this PLA filament provides dependable performance and consistent print quality. The bright pink colour gives finished models a clean, vibrant appearance, while stable extrusion helps minimise clogs and failed prints.

Key advantages include:

• Smooth, bubble-free extrusion for reliable print quality
• Vibrant pink colour for eye-catching finished models
• Neatly wound spool for consistent, tangle-free feeding
• Low-odour, plant-based PLA material
• Compatible with most 1.75mm FDM 3D printers
• 1kg spool suitable for extended printing sessions

Printing Information
For the best printing experience, dry the filament before use at 45 to 50 degrees C for 6 to 8 hours. Recommended nozzle temperatures range from 190 to 230 degrees C, while a heated bed temperature of 55 to 56 degrees C helps improve first-layer adhesion and overall print consistency.

Recommended settings:

• Nozzle size: 0.2mm or larger
• Printing temperature: 190 to 230 degrees C
• Heated bed temperature: 55 to 56 degrees C
• Print speed: 50 to 200mm/s
• Cooling time: 8 seconds
• Maximum volume speed: 12mm3/s

Technical Details

• Product type: PLA filament
• Filament diameter: 1.75mm plus or minus 0.02mm
• Colour: Pink (#FF8DA1)
• Spool weight: 1kg
• Compatible with: FDM 3D printers using 1.75mm filament
• ACE compatible: Yes
• Density: 1.24g/cm3
• Melt index: 4 to 10g/10min (190 degrees C / 2.16kg)
• Melting point: 166 degrees C
• Vicat softening temperature: 55 degrees C
• Heat deflection temperature: 54 degrees C
• Young's modulus: 2534 plus or minus 85MPa
• Tensile strength: 48 plus or minus 5MPa
• Tensile strength (Z): 26 plus or minus 1MPa
• Elongation at break: 8 plus or minus 1%
• Bending modulus: 3360 plus or minus 100MPa
• Bending strength: 90 plus or minus 3MPa
• Izod impact strength (X-Y): 22 plus or minus 2kJ/m2

The Part Number / SKU AHPLSP-107 makes it easy to identify and reorder the correct Anycubic PLA Basic Filament 1kg Pink for your 3D printing requirements.

Package Contents

• 1 x Anycubic PLA Basic Filament 1kg Pink

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	AHPLSP-10
Colour Code	Pink (#FF8DA1)
Consumable Type	PLA Filament
Compatible With	FDM 3D Printers with 1.75mm filament compatibility
Dry Out Before Use	Recommended
Drying Condition	45-50 degreesC, 6-8 h
ACE Compatibility	Compatible
Nozzle Size	Recommended 0.2 mm or above
Printing Temperature	190-230 degreesC
Heated Bed Temperature	55-56 degreesC
Recommended Printing Speed	50-200 mm/s
Cooling Time	8 s
Maximum Volume Speed (Flow Rate)	12 mm³/s
Density	1.24 g/cm³
Melt Index	4~10 g/10 min (190 degreesC/2.16 kg)
Melting Point Temperature	166 degreesC
Vicat Softening Temperature	55 degreesC
Heat Deflection Temperature (0.45MPa)	54 degreesC
Young's Modulus	2534±85 Mpa
Tensile Strength	48±5 Mpa
Elongation at Break	8±1%
Bending Modulus	3360±100 Mpa
Bending Strength	90±3 MPa
lzod lmpact Strength (X-Y)	22±2 kJ/m²
Tensile Strength (Z)	26±1 MPa
Product Weight	1000g