ADP040-54V-POE-GL specification sheet

In Stock Buy now!

Overview:

Power Adapter ADP040-54V-POE-GL
ADP040-54V-POE-GL is centralized network remote power adapter with single port, and designed for indoor wireless AP. Its Voltage input is from 90 to 264VAC. This adapter can connect to other network terminal equipment, such as wireless AP, with CAT5e cable, working for 10/100/1000M network scenarios.

Specifications:

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	ADP040-54V-POE-GL
Size(L x W x H)	Adapter: 110mm x 62mm x 31.5mm
	Injector: 79mm x 70mm x 31mm
Weight	282g
Input Voltage	90V AC~264V AC, 47~63Hz
Input Current	1.5A Max, at 115Vac, Full load
	0.8A Max, at 230Vac, Full load
Input Connector	IEC320 C14
Output Voltage	54V
Output rated current	0.74A
Output Power	40W
Output Connection	Pins 4,5(+) Pins 7,8 (-)
Power Efficiency	Level VI
Protection	OCP, OVP, SCP
Temperature	Operation: -10°C~45°C
	Non-operation: -40°C~70°C
Humidity(Non-condensing)	5%~95%
Altitude	Up to 5000m
EMC	EN 55032: RE, CE
	CISPR 32: RE, CE
	IEC 61000-4-2: ESD
	IEC 61000-4-3: RS
	IEC 61000-4-4: EFT
	IEC 61000-4-5: Surge
	IEC 61000-4-6: CS
	IEC 61000-4-11: DIPS
Safety Approvals	CE, TUV, UL, CCC